Models > GXWH20F > Instructions

GXWH20F General Electric Water Filter System - Instructions

All Instructions for the GXWH20F
1 - 5 of 5
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Replace rubber O ring
The old one got streached out of shape. The new one fit fine. Easy!
Parts Used:
Sump Housing O-Ring
  • David from Carrollton, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
11 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Time to change the filters
Quickly System had air in it (Normal) Pushed red relief button to bleed system, Filter started to leak and wouldn't stop. To correct I pressed button multiple times. Leak stopped.
Parts Used:
Water Filtration System Water Filter
  • Tom from WEYMOUTH, MA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    30 - 60 mins
3 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
None
Replaced filter
Parts Used:
Sump Housing O-Ring
  • Robert from ALLENTOWN, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Sump housing o-ring was stretched out of shape
I was due to change the water filter cartridge anyway so I ordered the new o-ring and using the wrench supplied with the filter, I did my normal cartridge replacement and changed the o-ring on the housing at the same time. Real easy. I bought spares in case I ever need them. The original o-ring lasted 5 1/2 years.
Parts Used:
Sump Housing O-Ring
  • Richard from Lansing, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water filter cartridge over a year old, needed changing
With this whole house water filter in line with the water heater line, I could see the filter was dirty because of the clear water filter housing and the original filter was white. I used a manufacturer supplied spanner wrench and turned off the water first, then unscrewed the filter housing and replaced with the new white filter cartridge, then re-installed the cartridge housing. The old one was visibly full of dirt because it was nearly black with sediment. I like the original equipment cartridge because it is white, other charcoal filters are black so you can't tell when they are full of dirt.
Parts Used:
Household Sediment Filter Set
  • John from Alameda, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Wrench set
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the GXWH20F
1 - 5 of 5