Mon-Fri: 7am-1am EST / Sat-Sun: 7am-11pm EST
Below is a list of all parts for the Whirlpool Dishwasher GU1100XTLQ1 - Undercounter. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.
**Please note: This is a redesigned part. The top mounting clip and screw are no longer needed.
The gasket provides a seal between the tub and the door. The door strike serves as a mechanical actuator for door switch operation and provides door tension for proper seal.
Used for upper dishrack track.
This chopper assembly chops/minces the food particles to prevent clogging of the dishwasher pump.
This dishwasher heating element is not designed to heat the water that enters it, but is designed to maintain the heat of the water that enters the dishwasher. It is located on the bottom of the dishwasher and also comes with the 2 washers.
When replacing these fuses the wire harness must be replaced as well. It is located in the control panel. The harness is included with this part now.
This part releases the detergent and rinse aid into the dishwasher.
This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoid on the valve will open and close according to t...
This seal is located between the spray arm and the water feed tube.
This part is the top spinner located at the very top of the wash tub. Water passes through all the spinners causing it to dispense all around the tub.
Also known as a wash arm seal.
Sold individually. Used with the heating element.
May differ in appearance, but functions same as original.
This valve allows the water to flow in the drain direction only and prevents the dirty water from coming back into the tub.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2015 , Eldis Group Partnership. All rights reserved.