GS5SHAXNL00 Whirlpool Refrigerator - Instructions

I shut the unit off for about ten hours and when I turned it back on and set the temperatures for the freezer and refrigerator it has been working great.I will keep the part in case it happens again.

Watch the movie adjacent to the part on the ordering list,follow said instructions you can't miss.Thanks for the movie,the ease ordering the friendly associate that took my order and your timely shipment.Once again thanks for everything.Thomas J

Repair was easy. But what I really liked was the prompt/timeliness of the correct part delivery. That's what really made the difference. (My ice bucket is FULL of ice).THANKS!!

Watched video

when I install the Electronic Control Boards has not Receiver the Electronic from water valve .

I followed your vedio instructions to the tee and removed and replaced my icemaker and replaced the control module in about 30 min. It was easy and I saved a bundle in having a tech do the work. Thanks and keep those instructional vedios comming.

Used 1/4 inch nut driver with swivel to remove the part retaining screw. Held new part into place and installed the retaining screw. Challenge was not hitting the level and putting water on me and the floor during installation. Relatively easy installation as long as you have patients.

Removed the refrigerator door (after taking everything out of the shelves). Took the old Lower Door Closing Cam off (it was totally worn down), installed the new one, rehung the door. Rehanging the door took a couple of tries to get it properly aligned. Very easy fix, We thought we had to replace the refrigerator since it is 14 years old, but this fixed the problem completely!

Watched Parts Select YouTube video for demonstration of installation. Went smoothly.

Replaced snap in brackets

We moved into a house that we are renting. The whirlpool refrigerator was missing the the ice shoot. The landlord wouldn't hire someone to install one. I am %95 blind. I went on PartSelect , entered the refrigerator and they had an easy blow up diagram. I ordered the part and watched a video on how to install it. When the part came in my son watched the video and had it installed. Hats off to PartSelect for their great web site .

Got on floor, removed grill cover. Turn counter clockwise, remove old filter, replace turning head from old to new and inserted new filter, turning clockwise. operation done. Replace gril cover. Press indicator button 5 times, Takn a number of glasses of water untill clouded water clears. DONE

remove contents of door-----------hardest part of chore remove top hinge cover remove three top hinge screws remove door and lay on table remove two screws holding black plastic cam piece in door, remove black plastic piece (slightly held in by some type of mastic) just pull till it comes our insert new piece, insert two screws lubricate parts mount door on hinge pin insert tip hinge pin and plate and fasten with three screws attach cover............reload refrigerator door taking opportunity to throw out old bottles and mystery jars Finis

1. I first confirmed that the problem was a bad Infrared Ice making control board (Watched flashing of red light on right side of freezer - solid light would not occur when holding flap on left side of freezer). 2. I unplugged refridg,3. unscrewed both sides of the control unit and disconnected wire clips to the electronic boards. 4.popped in new Boards on both sides and connected clips onto each board. 5. Screwed the boards and covers to walls of freezer. 6. Plugged power back into wall and checked Red light again (when holding flap in, a continuous red light verified it would work). closed freezer and shortly ice was being made. Simple process. (careful using Screwdriver to help take wire off of boards - a small clip holds wire clip on - you need to stick screwdriver into back of clip while unconnecting). Easy and my ice worked perfectly.

Watched parts select video did what it said, was very easy to do.