All Installation Instructions for Maytag Refrigerator GS2124IDEW

exchange of defective light rocker switch

1)pry out the old/defective light rocker switch with a screw driver (flat head) and pull out the cables 2)unplug two connectors at the end of light rocker switch 3) connect new light rocker into two connectors 4)push the wires inside and put back new light rocker switch

Parts Used:

Refrigerator Door Switch

Steve from River Edge, NJ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Light in the refrigerator didn't work

I did exactly as the video showed. I popped out the old switch, disconnected the two terminals, connected the new switch and put it back. The light now works! The refrigerator is over 25 years old and the switch works! What a great website this is. Couldn't of done the job without Partselect's help.

Parts Used:

Refrigerator Door Switch

Anthony from Fairport, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Broken ice bin drive ring

Easy disassemble removing screws to separate front of ice bin.Be sure to note how metal rod is attached to rear of ice bin. Installed drive ring and reattached face (front) of ice bin in about 15 minutes.

Parts Used:

Ice Bin Drive Ring

James from Lincoln, NE
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Fridge Door Was Not Sealing Properly

I removed three screws from top hinge. Lifted door off bottom hinge and set door on a flat surface. Replaced part and set door back in place. Put screws back and door fit tight again.

Parts Used: