Models > GHW9400PL0 > Parts

GHW9400PL0 Whirlpool Washer - Parts

All parts for the Whirlpool Washer GHW9400PL0

Below is a list of all parts for the Whirlpool Washer GHW9400PL0 - Residential. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the GHW9400PL0
1-14 of 197
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Door Handle

This handle may appear white, but is light gray in color called Platinum.


Drum Baffle

This part moves the clothes around inside your dryer/washer and helps to direct the flow of hot air during the drying cycle. Sold individually.



This part is also called the Door Boot Seal. It's the main seal between the front bulkhead and the outer tub. Clamps are not included. Must order clamps separately, if needed.


Drain Pump Kit

This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time. This part is used on front load models.


Door Lock Latch

This part is used on front load washers and includes the interlock switch assembly.


Control Knob

This knob is light gray and is used on platinum-colored models. Sold individually and accepts a D-shaped shaft.


Water Inlet Valve

Used with some front load washers. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.


Door Handle

Pewter in color. Handle only.


Shock Absorber

Shock absorbers help keep the washer from vigorous shaking during its cycles. Sold individually.



This part continually measures the amount of water entering the tub. It will make adjustments if too much or too little water is present.


Bellow to Outer Tub Clamp

Used to help hold your bellow in place on your washer.


Bellow Clamp

This is used to help hold the bellow in place.


Touch-Up Paint - White



Drive Belt

This drive belt is made to slip on the motor pulley to bring the basket up to the speed required and this makes the belt get wear and tear. NOTE: Per Manufacture, belt measures 48.22" long uninstalled and the belt will stretch To 51.53" when installed.

All Parts for the GHW9400PL0
1-14 of 197