Models > GFC300-03 > Instructions

GFC300-03 General Electric Food Waste Disposer - Instructions

All Instructions for the GFC300-03
16 - 30 of 36
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
old one wore out and had shrunk and coming loose.
Turn off power to unit (switch off) Put rubber gloves on and pulled out old guard. Then cleaned the area on the sides and the under the lip with wet paper towels. Crud had built up. Once clean push the new guard in. Since it was new it was tight .push down moving finger pressure around until it seated. Works fine.
Parts Used:
Disposer Splash Guard
  • Tom from ORLANDO, FL
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
splash guard worn out
just put it in the drain
Parts Used:
Garbage Disposal Drain Stopper
  • thomas from drums, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Original splash guard was torn.
Opened package, pulled out old splash guard, inserted new rubber splash guard. Perfect fit. No tools needed. Completed in under1 minute.
Parts Used:
Garbage Disposal Drain Stopper
  • Elin from CHICAGO, IL
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I lost the old splash guard
I simply inserted the new splash guard in the opening
Parts Used:
Garbage Disposal Drain Stopper
  • Keith from New Buffalo, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
5 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Splash guard had been replaced by faulty generic guard.
Found the proper GE Splash Guard and slipped it
into place. The repair was a snap but finding the part was difficult until I found it on PartSelect.
Parts Used:
Garbage Disposal Drain Stopper
  • Laurel from Sunfish Lake, MN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old guard brittle and broken fell into disposal and was disposed
Removed new guard from package and slipped it right into place, no problems.
Parts Used:
Garbage Disposal Drain Stopper
  • James from Brandon, MS
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The Splash Guard had begun to disintgrate. One from Lowes didn't fit correctly. The Stopper got thrown away by accident during the holidays.
New Splash Guard fits perfectly and allows food to go into the disposer more easily. Couldn't be happier. ordered items one day and were here the next at no extra cost.
Parts Used:
Garbage Disposal Drain Stopper Garbage Disposal Drain Stopper
  • Susan from Crossville, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The splashguard on the disposall had deteriorated leaving a silver-dollar-sized hole.
The repair was simple. I removed the old splash guard and placed the new splash guard in. It took less than a minute. Absolutely no tools required.

Quick shipping too. I had the replacement part in 2 days.
Parts Used:
Garbage Disposal Drain Stopper
  • R M from Bloomfield, NE
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replace water filter
Very simple to replace
Parts Used:
Garbage Disposal Drain Stopper
  • Brenda from Lykens, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old splash guard was worn out.
Simply took old one out and snapped new one in place.
Parts Used:
Garbage Disposal Drain Stopper
  • Pat from Elkin, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
splash guard on disposer worn out
pulled the old one out and pushed the new one in place.
Parts Used:
Garbage Disposal Drain Stopper
  • Scott from Evansville, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
splash guard was worn out
Received the new splash guard within 3 days, took it out of the package, pulled out the old one and inserted the new one. No tools, it took about 1 minute. Very easy!
Parts Used:
Garbage Disposal Drain Stopper
  • Warren from Sanford, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Part was worn out
Simply pressed the splash guard in to place
Parts Used:
Garbage Disposal Drain Stopper
  • ALICE J from El Paso, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
bottom of spash guard worn away
Pulled old one out. It goes into basket from top of sink.Placed the new one in.
Parts Used:
Garbage Disposal Drain Stopper
  • Lowell from Wheelersburg, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
The splash guard had deteriorated and kept falling into the disposall.
The repair was extremely simple, it took less than a minute to complete. It was a perfect fit and it significantly reduced and dampened the noise once it was installed. The shipping was super fast as it arrived within 48 hours of my placing to order.
Parts Used:
Garbage Disposal Drain Stopper
  • ELENO from CHINO HILLS, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the GFC300-03
16 - 30 of 36
Back to Top