Models > GCWM1069CS7

GCWM1069CS7 LG Washer Dryer Combo - Overview

Models starting with GCWM1069CS7

Keep searches simple, eg. "belt" or "pump".
Magnetic Door Plunger – Part Number: AGM73610701
Magnetic Door Plunger
★★★★★
★★★★★
(61)
PartSelect #: PS3618292
Manufacturer #: AGM73610701
This magnetic door plunger, also known as the magnet holder, is built for your washer. When you order this part, you will receive the plastic housing and a spring that goes with it. The magnetic door ...
$24.28
  In Stock
Rear Tub Gasket – Part Number: 4036ER2004A
Rear Tub Gasket
★★★★★
★★★★★
(15)
PartSelect #: PS3522855
Manufacturer #: 4036ER2004A
If you notice your washing machine is leaking water from the top of the transmission, it might be due to the gasket being damaged or worn down. When replacing your gasket, consider replacing your tub ...
$31.60
  In Stock
Tub-to-Pump Drain Hose – Part Number: 4738ER1002A
Tub-to-Pump Drain Hose
★★★★★
★★★★★
(16)
PartSelect #: PS3523345
Manufacturer #: 4738ER1002A
This is a tub-to-pump drain hose for a front load washer. The hose features flexible bellows which allow it to expand and contract when necessary. It carries the water from the tub of the washer to th...
$41.80
  In Stock
Gasket – Part Number: 4036ER4001B
Gasket
★★★★★
★★★★★
(6)
PartSelect #: PS3522859
Manufacturer #: 4036ER4001B
This is a seal for a washer tub. It creates a seal between the front and rear halves of the washer tub to prevent the appliance from leaking. If you notice leakage between the two sections of the tub,...
$31.60
  In Stock
BEARING,BALL – Part Number: 4280EN4001D
BEARING,BALL
PartSelect #: PS7785070
Manufacturer #: 4280EN4001D
This is known as a tub bearing or a rear bearing, and it is part for your washing machine. The function of this bearing is to be a support for the spin basket shaft that is located at the back of the ...
$49.36
  On Order
Pump Filter – Part Number: 383EER2001A
Pump Filter
★★★★★
★★★★★
(10)
PartSelect #: PS3522306
Manufacturer #: 383EER2001A
This replacement pump filter, also known as a filter assembly, is a genuine OEM part for your washer or washer/dryer combo. Before beginning this repair, turn off the power and water supply to your wa...
$26.81
  In Stock
Locking Pin – Part Number: 4774FR3118B
Locking Pin
★★★★★
★★★★★
(2)
PartSelect #: PS3523451
Manufacturer #: 4774FR3118B
This is a locking pin, and it works in conjunction with your washer. The part measures to be roughly 3 inches long, and less than an inch wide. The pin is cylindrical, off-white in color, and made ent...
$14.51
  Special Order
Clamp Assembly – Part Number: 2W20017E
Clamp Assembly
★★★★★
★★★★★
(3)
PartSelect #: PS3517812
Manufacturer #: 2W20017E
The door boot seal clamp, also referred to as an outer door gasket clamp, holds the door boot in place in a front-loading washer. If your washer is leaking from the door and there are no signs of dama...
$17.57
  In Stock
Hose Assembly,Drain – Part Number: 5215ER2002G
Hose Assembly,Drain
★★★★★
★★★★★
(3)
PartSelect #: PS3527325
Manufacturer #: 5215ER2002G
The drain hose assembly is a genuine OEM assembly supplied directly by LG for use in washing machines. The assembly includes the hose, connector, elbow fitting, and metal clamp. It is responsible for ...
$50.55
  In Stock
CAP,DRAIN HOSE – Part Number: 5006EN3015A
CAP,DRAIN HOSE
★★★★★
★★★★★
(5)
PartSelect #: PS3635866
Manufacturer #: 5006EN3015A
This drain hose plug, also known as a hose cap, is a genuine OEM part for your washing machine. This plug caps the drain hose from the pump housing, and helps prevent leaks from your washer. Before be...
$8.06
  In Stock
Clamp – Part Number: 4861FR3068A
Clamp
PartSelect #: PS3524032
Manufacturer #: 4861FR3068A
$9.90
  In Stock
Shock Absorber – Part Number: 383EER3001G
Shock Absorber
★★★★★
★★★★★
(2)
PartSelect #: PS3522311
Manufacturer #: 383EER3001G
Sold individually.
$46.98
  In Stock

Common Symptoms of models starting with GCWM1069CS7

[Viewing 5 of 5]
Leaking
Fixed by
these parts
Fixing Fixing Fixing
Show All
Lid or door won’t close
Fixed by
these parts
Fixing
Show All
Will not drain
Fixed by
these parts
Fixing Fixing Fixing
Show All
Burning smell
Fixed by
these parts
Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Door would not close
There is a magnet at the bottom of the door which allows the door to be held ajar when the washer is not in use to allow the tub and gaskets to dry. A tab on the plastic housing which retains the magnet broke which allowed the housing to pull free of the door and stick itself to the machine preventing the door to close. Easy fix to replace the magnet was $18. Instructions were included in the box. Part number on the drawing was A165. PS3618292 Magnetic Door Plunger
Parts Used:
Magnetic Door Plunger
  • Omnitech from Warrenville, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
154 of 170 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
leaking tub-to-pump drain hose
Pull washer away from wall. Unplug cord and remove drain hose from receptacle. Remove 4 screws holding panel to rear of washer. Squeeze and slide back hose clamps on each end of drain hose and loosen center clamp with screwdriver. Remove old hose. Reinstall new hose in reverse order using existing clamps. Re-install back panel.
Parts Used:
Tub-to-Pump Drain Hose
  • Leslie from STOWE, VT
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
46 of 58 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Plunger fell out broken tab.
Just aligned and pushed in.
Parts Used:
Magnetic Door Plunger
  • Wayne from AUBURN, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
14 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!