Models > G37025PEAS6

G37025PEAS6 Maytag Refrigerator - Overview

Get Parts and Repair Help for G37025PEAS6

If you know the refrigerator repair part you need, you can browse the list of all parts on the G37025PEAS6, or you can search by name or part description. You can also find your part by where it is located on the G37025PEAS6 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$19.18

Pantry End Cap - Left Side

$18.86

Pantry End Cap - Right Side

$18.25

Center Rail

This is the center support rail for the refrigerator crisper drawer.

$2.70

Screw

Sold individually.

$34.04

USE WPL 67005899

$40.95

GRILLE-FRT

$3.86

Touch-Up Paint - White

$73.54

Crisper Glass Shelf Insert

Frame not included.

$3.96

Humidity Control Slide

$28.51

Fan Blade

Used with Evaporator Fan Motors.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The poorly designed deli drawer lid tab broke off

  • Customer: Tim from Littleton CO
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 77 of 85 people found this instruction helpful
Removed the fruit & veggie drawers & the deli (pantry) drawer. Took out the 3 screws, removed the attached parts, put them on the replacement part, reattached it and put the drawers back in.

Here's the part I want to share: PartSelect had a expanded diagram showing the correct part and sufficiently detailed to figure out the repair before the pa... read more

Dropped a jug and broke the lower drawer hinge pin

  • Customer: Gordon from Cold Spring KY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 60 of 63 people found this instruction helpful
Remove food off of lower shelf, remove the two produce drawers, remove large lower drawer, remove glass shelf, remove three screws holding end cap in place. Once end cap was removed the drawer track could be removed and placed on new end cap. Installation of new end cap took less than 5 minutes. Most of the time spent was removing/replacing food and clean... read more

broken hinge pin for deli draw cover

  • Customer: Thomas from Kingston NH
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver
  • 39 of 43 people found this instruction helpful
1. remove deli draw
2. remove glass top & end caps
3. remove screws on side of end cap
4. remove end cap
5. remove crisper control connection bars & rear ductwork
6. reinstall crisper control connection bars & rear ductwork
7. install new end cap & rear ductwork
8. install glass top & end caps
9. install deli draw & co read more