Models > FWT647GHS0 > Parts

FWT647GHS0 Frigidaire Washer - Parts

All parts for the Frigidaire Washer FWT647GHS0

Below is a list of all parts for the Frigidaire Washer FWT647GHS0 - Residential. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the FWT647GHS0
1-14 of 110
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Door Strike

Use with front load washers.


Door Lock and Switch Assembly

NOTE: As per the manufacture, some models require a new wire harness and a door strike for this door lock assembly to work on the appliance. The original style lock would require the door lock kit.


Shock Absorber Kit

This kit is used for front load washers and includes 2 dual-stage shock absorbers, 1 spare shock mounting pin and 4 locking nuts. These shock absorbers keep the washer from vigorou...


Water Inlet Valve

This washing machine water inlet valve has two ports for water to enter.


Drain Pump - 60Hz 120V

This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time.


Single Spring with Insulators




Drain Hose

This part comes with a ninety degree elbow.


Drive Belt - 6 ribs


Tub-To-Pump Hose


Drum Vane

Also known as a Drum Baffle. Sold individually.


Bellow with Clamp

Also known as the door boot seal. This part is used to keep the clothes inside the tub during the wash cycle. The folds in the bellow allow the tub to move separately from the door during the spin cycle.


Control Rotary Knob

Sold Individually. This knob accepts a D-shaped shaft.


Push-in Fastener

All Parts for the FWT647GHS0
1-14 of 110