FSG447GHS0 Frigidaire Dryer - Instructions

I followed the vidio from yor web site it was great without it i would still be trying to get done.

This site is awesome! Read the posts and ordered the part. Installed it per the instructions in the other posts and dryer has worked like new. No more ruined clothes. Very easy.

Pulled the old one off, slipped the new one on. Couldn't be easier, just like the video instructions on the site said. Really appreciated the fact that while the delivery estimate was 3-5 working days, it came the next day and I was done with this problem.

Took the coils off and put the new one on thats all

The timer knob fell off my dryer about a month ago. I could see that the little post holder thingy on the inside was cracked. I tried duct taping it. Didn't work. So I was using pliers to turn on the dryer as I did not have time to look up a repair person and did not want to wait around all day for one to show up in the "four-hour window." Then it dawned on me - I should try to find the part on the internet. I typed into my browser "Frigidaire Dryer parts." And I went to the first site that popped up…www.Partselect.com.

The site showed me where to locate the model number on my dryer. I typed in the number and then selected the timer knob as the part I needed. There was a brief video showing me how to install the part. Took less than 5 minutes to place my order - $30 with shipping. That was Sunday at 10 p.m.- it arrived Tuesday afternoon at 4:30 p.m.

I followed the installation directions and had my dryer back up and running within 30 seconds.

took front off machine removing screws. Removed old felt and cleaned old glue off making sure area was clean. applied new glue and then new felt drum glide. put fish sringer around complete drum pulling tight clamping with vise grips till dry. then put front back on machine.

This repair was very easy and straight forward. I removed the front of the Dryer, following the video instruction on PartSelect website.Removed the old upper Drum glide, scraped the fron clean from any residues, applied 2 strings of glue and applied the new Drum Glide and holding it for a couple of minutes only to dry. The lower Drum seal was not too bad so I only cut of the worn out area, cut a strip of the new drum seal to fit perfectly and applied the new seal after scraping the door clean from residue. After about 5 minutes, I reassembled the Dryer and it worked like a charm. Thanks Part Select for the supplied instructions. Very Very easy and it saved me from purchasing a new Dryer.

Installed just like the video described and it went quite well. The part arrived in a short amount of time and the belt was exactly what I needed.Thank you I will visit your web site again. A very satisfied customer. :) Veronica G.

Had the macnine apart before ordering the Bearing Assembly. Reading other comments convinced me to order the Bearing Assembly. Parts were shipped very quickly after ordering and following the instructions on the web site things went back together easily.

followed the video instructions....easy as pie. Glad i bought the belt too....the belt on my dryer was very worn. Changed the bearing with the kit. Very easy to do. The whole job was done in an hour and a half....back together and running without the squeak. Glad i repaired instead of buying a new dryer. Next time i have a problem with an appliance, i will be checking PartSelect first.

I watched the videos provided on this website and followed the instructions in the order confirmation e-mail. These were both very helpful

My machine is stack washer dryer model. First remove d the door, control panel and the front panel where the seal is. Removed the old seals and glued on the new ones in placed. Cleaned and vacuumed the unit while the glue was setting up. Also had to replace the spring clip on the vent fan. Try to find a replacement clip on a Sunday afternoon. Put the uni t back together . Machine runs quiet as a mouse and no more stains and holes in my cloths.

Replaced rear bearing on back of dryer. Repair cost $20.00 an a little time. Much better then buying a new dryer. It was easy to repair the video instructions were great. I would do it again it needed.

Found instructions on "UTube"some of the screws were in a different position but you can see them. While you have the dryer apart it's a great time to clean it and also as long as you've gone this far replace the belt,it's probably time.

The new latch easily snapped it into place.