FRS6R5ESBL Frigidaire Refrigerator - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Shelf broke
-
Edwin from Copperas Cove, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
back clip of shelf broke allowing shelf to tilt
Removed old shelf. Removed glass from shelf. Installed glass in new shelf. Installed new shelf into frig. Returned drawer to bottom of shelf. Super Easy.
Parts Used:
-
Burke from Norman, OK
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
bottom door bin broke
-
Dawn from Kansas City, KS
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
old drawer support snapped
aligned tabs and slid into place - total repair time 30 seconds :)
Parts Used:
-
kiki from new orleans, LA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
drawer support broke
-
John from Leesburg, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
the auger assembly broke (my fault) do I had to replace it!
I was happy you all had the part that I needed and I could easily remove the old one and slide the new one right into place!
Parts Used:
-
Tim from Carthage, MS
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
broke fan blade while trying to remove dust.
Removed old fan motor and installed new one.Not much room for big hands back there.Flexible extensions valuable on this job.
Parts Used:
-
Jack from Kiefer, OK
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Socket set
Was this instruction helpful to you?
Thank you for voting!
Broken bins
-
Robert from Norfolk, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
The drawer slides / tracks were broken
Pulled out the drawers, lifted out the frame and the glass, dropped the new frame in, put the glass on the new frame, and then the drawers slid right back in on the unbroken tracks. Probably the easiest repair ever. It took longer to clean the refrigerator and the drawers than it took to replace these items.
Parts Used:
-
ann from raleigh, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
I broke the bottom bin on the refrigerator door
The 2 door bins came in 3 days! I could not believe how fast the service was. The door bins just slid right into place, not tools required. They look great. Special shout-out to Jennifer T. who helped me over the phone. I placed the order for the bottom door bin and later realized that I could add one more door bin to the refrigerator door to make more storage area. I called the customer service number and she canceled my order. She sent me a follow up email and I was able to place a new order to get both door bins and save on shipping fee. PartSelect was great! Thank you!
Parts Used:
-
Jane from Mequon, WI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
broken shelves
-
Chase from Conyers, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Drawer support broke.
I was worried that the support was a permanent fixture in the refrigerator wall. But I pried it out and replaced it with the new part. Holes were exactly the same size so the new part easily replaced the old one.
Parts Used:
-
nancy from Bellingham, WA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Fan would stop or turn slowly. outside of refridg hot
took off cardboard removed two screws holding fan housing. Removed new fan and housing from box and mounted new fan to new housing (two screws). Installed new fan and housing. reinstalled cardboard and plunged in power cord. Perfect fit.
Parts Used:
-
Rusty from Howell, NJ
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Socket set
Was this instruction helpful to you?
Thank you for voting!
support clips broken for 2 bins
Purchase was easy. Delivery was quick. Install videos was accurate. Made it eady to as DI project. Safe place for purchase and support. Saved on cost of professional visit.
Parts Used:
-
Thurlowe from Tampa, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Compressor running constantly with freezer temperature at -20 degrees fahrenheit.
Since the evaporator was all iced up, I decided to replace the least costliest item (defrost thermostat kit); did not resolve the problem. Once I replaced the freezer temperature control thermostat, the freezer temperature stabilized right at 0 degrees fahrenheit with dial on factory setting. Compressor no longer running constantly.
Parts Used:
-
Steven from Raymond, NH
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!