FRS6HR45KS0 Frigidaire Refrigerator - Instructions

This was the second time the part had failed and it was time to replace it. Rsther than hope a local store may have the part, I went on the internet and found PartSelect.com and ordered what I thought was the right part and it arrived here in Texas the next day! Turned out to be the wrong part. Oops! I contacted PartSelect by email to see if I could return the part and got an imediate response from Denise with the address ad instructions for returning the part and a very generous offer to help select the right psrt. I gave her the refrigerator/freezer model number and she immediately respoded with the part number. I rerordered the part and it again arrived the next day. I slipped it into place on the refrigerator door and it fit!! End of problem but not quite the end of the story. I received an email a couple of days later informing me that the money due me from the first order was on it's way. Color me a very happy customer!!

thanks to all of the people who had the same problems I was able to make a quick fix on my fridge. I pulled the back cover off and found the compressor not kicking on so I replaced the start cap. and im back in bussiness.

I removed the broken bin and replaced it with the new one

When my wife and kids moved down they lost the upper bracket and the screw for the lower cam. parts show up and matched perfectly to the orginal no issues at all

I turned off the water, removed the cardboard cover from the back of the refrigerator; removed the 2 screws holding the water valve in place; unscrewed the plastic tubing from the valve; unplugged the wires to each solenoid (3); the old valve had threaded connections for the plastic water lines, the new valve didn't; I had to cut the ferrel off of the plastic lines so I could insert them into the new valve and then press the connector into the valve (I didn't anticipate something like this, but it worked fine); I reconnected the wiring and screwed the valve back into place. The ice maker started making ice and the water stopped dripping from the dispenser. The best $65 I've ever spent.

What would have been a simple job I made hard by pulling the water hose out of its place that was the hardest part about putting the ice dispenser back in, it took me about thirty minutes to put it back I !

Open door - popped it in - done

pulled the old seals off one at a time and starting from the top of each door, pressed the top edge of the seal into the groove, using the quik clamps to hold the top in palce at each top corner, went down each side of the door and pressed the seal into the groove, when I reached the bottom, I moved the clamps to the bottom and used thm to help press the seal into the bottom groove, Each door took about 15 min.

remoed plastic housing unsnapped board snapped new board in replaced new housing

Fixing the meat drawer slides was really easy and I got it fixed in a snap. What I wanted to tell you was that I ordered the wrong bins twice and your customer service person was just great she got me the wright bin and made returning the wrong parts very easy. I would like to complement her on her service.

We adjusted the door bins that were already in he refrigerator and installer the new one.

followed the video and had little or no trouble loosening or tightening bolts or phillips head screws. The only difficulty was removing the spacer on the door itself. Otherwise a piece of cake. Good video and easy to follow instructions.

Replaced

The repair was very easy, just a matter of snapping the bin on the door. However, i was very please and impressed with the expeditious service that i received. I ordered the door around noon and it was delivered by 10am the next day. This is what i consider "quality service" and I thank this company sincerely.

A part replacement. I was extremely happy to find the somewhat obscure part at Parts Select and at a very reasonable price. The part arrived in three days and fit perfectly. Very satisfied!!!