Models > FGB24T3EBD > Instructions

FGB24T3EBD Frigidaire Oven - Instructions

All installation instructions for FGB24T3EBD parts

These instructions have been submitted by other PartSelect customers and can help guide you through the oven repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the FGB24T3EBD
1-3 of 3
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

becomes very hot & internal mechanism bends

  • Customer: Kathleen from Spring TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Just compressed the circular part to insert it in place. Already melted & will not function again with use of the oven; cannot turn off the oven with this knob. Need to find a safer substitute for this knob. I took it out again and am using the eraser end of a pencil to turn off my oven. At least it is easy to take out; it could be melted to the control panel. It is all in how you look at the situation...might as well laugh since I can eventually turn off the oven.

Clock/timer was bad.

  • Customer: Don from Mesa AZ
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Easy repair. I simply removed the upper screws and removed the panel that the clock/timer was attached to. The switch for the oven light is also attached to that panel so to avoid a shock when you remove the wires from the switch you need to shut the power off to the oven. I unplugged the wires from the switch and the timer and laid the panel on the table. I removed the 4 screws that held the clock/timer to the panel and installed the new one in its place. Reassembled everything in the reverse order and turned the power back on. The repair was successful and evrything works well.

Sliced Outlet Cord

  • Customer: William from Saint Clair Shores MI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I was replacing a range oven hood, so I pulled the oven away from the wall but left it plugged in. I removed the old oven hood, which had an exhaust pipe that was still mounted through the cupboard. While I was preparing the new oven hood the exhaust pipe fell out of the cupboard and cut the oven wire in half. I was able to find the part number on the existing cord and looked up on line. I ordered the part using 3-5 business days and it showed up in 2 days. I was able to attach the new cord, which had an easy clip plug, and secure back to the stove. Very easy and very inexpensive to do.
All Instructions for the FGB24T3EBD
1-3 of 3