Mon-Fri: 7am-1am EST / Sat-Sun: 7am-11pm EST
Below is a list of all parts for the Roper Range FES340VW1 - Electric. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.
This part has been substituted by the manufacturer and has a hole in the center. It no longer has a solid bottom.
This part is located beneath the element and catches any spills.
This newer-style terminal block kit includes two metal brackets, two pre-crimped wires with terminals, two ceramic wire nuts, a heat shrinking tube, and a mounting screw.
NOTE: The manufacturer recommends that you replace the burner receptacle at the same time.
The manufacturer suggests replacing the receptacle at the same time.
This metallic screw is less than an inch long and comes with a plastic washer.
Please note: This is a substitute from the original part. It may physically look different, but will still function the same. This bake element is found on the bottom of the oven.
This broil element is found on the roof of the oven.
This rocker switch can be used for both the oven selector and/or the oven light.
This board sends information (such as temperature of oven, bake, broil) to the main control board during specific functions.
This temperature sensor detects the temperature within the oven cavity.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2015 , Eldis Group Partnership. All rights reserved.