Models > FEFL68GMA > Instructions

FEFL68GMA Frigidaire Range - Instructions

All installation instructions for FEFL68GMA parts

These instructions have been submitted by other PartSelect customers and can help guide you through the range repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the FEFL68GMA
466-480 of 493
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

baking element didn't heat

  • Customer: Suann from Alvord TX
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Socket set
  • 0 of 0 people found this instruction helpful
Watched the video on parts select. Ordered the part. It arrived earlier than expected. Pulled stove out and cleaned under and all around then installed the element as the video instructed. Pluged the stove back in, pushed it back in place and it worked. This took approximately 30 min. Probably saved me $100 and many days.

Element was burned out.

  • Customer: Gary from Syracuse IN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Took out the old, put the new in. No brainer.

oven stop heating

  • Customer: Carolyn from Converse TX
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
y-tube repair video. unplug stove. take out the heating element. replace w/ new one. plug stove in. WORKING!!!!

Cracked baking element.

  • Customer: Justin from Lincoln NE
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
First off, I ordered the part on a Sunday afternoon and received it Tuesday morning with the regular shipping option, simply amazing! The repair was even simpler! - Unplugged the stove. Removed the racks. Unscrewed two screws and disconnected the two electrical ends of the baking element. Removed the old baking element, reattached new element to electrical and secured the screws. Put the racks back and plugged it back in. Total time maybe five minutes tops. Also, the "repair video" for this part was a great reference. Peace of cake!

The baking element went out on my oven

  • Customer: Becky from Hallsville TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
After pulling the unit away from the wall & unplugging it, I removed the racks to give more room in the oven, I removed two Phillips head screws, pulled the element less than 2 inches to expose the electrical connectors, pulled them off the element ends, removed the baking element from the oven, installed the new element, plugged in the connectors to the element, pushed the ends in less than 2 inches, replaced the Phillips head screws, reinstalled the racks, plugged the unit in, slid the appliance back in place.

oven element split

  • Customer: Peggy from Woodbridge VA
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Wrench set
  • 0 of 0 people found this instruction helpful
Ordered part on a Saturday, shipped Monday, arrived Tuesday, took old part off with screw driver and replaced with new one. Very simple it took 1/2 hour. We probably saved a couple hundred dollars or more by doing work ourselves.

The element in the oven went out

  • Customer: Cyd from Westminster CO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Unscrewed the element, hooked up new wires and screw new element in. Less than ten minutes. The part was at my house in less than 3 days, didn't have to pay a service charge!!!!! I love this place.

the bake element burned up

  • Customer: michael from elliottsburg PA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
disconnect the power from the stove pulled the racks out and took a nutdriver loosened up the screws for the element and disconnected the wires from it and replaced with new element real easy

range top left big burner would not come on.

  • Customer: ruben from moss point MS
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
I disconnected the power cord,took the top back plate off,the switch knob on the switch I was to change,the two screws holding it.pull the old switch out,place the new one in the holder,replaced the two screws that holds the switch and took the wires off the old switch one at a time and placed them on the new one in order on new switch.replaced the back cover and plugged power cord back in.turned range on,it was good. r taite,

Baking Element burnt into

  • Customer: David from Dover TN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
unscrewed two screws, exposed wire connections. Disconnected two wires, then placed new element in oven and reconnected two wires, then pushed connectors back inside stove body. A acordless screwdriver made quick work of the two screws and the element works fine. Thank you for your quick delivery.

Element in oven burned up

  • Customer: Diane from Verona AL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
Watched the online video and followed the instructions. I unplugged the oven, used the nut driver to loosen the screws, removed the old element, hooked up the new element and voila... back in business. I received the part the next day after ordering it!

replaced the infinite burner switch

  • Customer: Alvie from Pasco WA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Wrench(Adjustable)
  • 0 of 0 people found this instruction helpful
I watched you vedio and done just as the vedio told me how to change the switch. When I got the switch on pluged it in turned it on and every thing work great. thank you very much.

Bake element caught on fire, then wouldn't work.

  • Customer: Greta from Ridgway PA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Socket set
  • 0 of 0 people found this instruction helpful
Turned off electric to range, removed old element, replaced it with the new one, then turned electric back on. Super easy.

Element didn't heat

  • Customer: Lisa and Marc from Fredericksburg VA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
First the item we ordered arrived in 1 day, we were totally amazed!! My husband switch out the heating element and it worked!!!! Thank you for great service!!!!

Bake element was bad

  • Customer: Darlis from Greenwood IN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
I had the old one out and new installed in less than 15 minutes and I would like to thank you for the promptness of your delivery
All Instructions for the FEFL68GMA
466-480 of 493