Quick Question!

Have you ever purchased from PartSelect.com before?

Models > FEFL67DCE > Parts

FEFL67DCE Frigidaire Range - Parts

All parts for the Frigidaire Range FEFL67DCE

Below is a list of all parts for the Frigidaire Range FEFL67DCE - Free Standing, Electric. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the FEFL67DCE
15-28 of 107
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$55.99

Bottom Panel

This is used as the "floor" of the oven cabinet. Note: Does not come with rivets or screws. Must be purchased locally.

$92.53

Radiant Burner Element with Limiter - 9" - 2500W

$5.02

Steel Washer

This steel washer is also known as the range washer and is used on your oven door. The measurements for the steel washer are a three quarter inch outer diameter, and a one quarter ...

$29.24

Oven Light Socket

The oven light socket allows you to screw in a light bulb so that you can see the inside of your oven. The light socket is located in the back of your oven, so you will need to remove the back panel to access the socket for the repair. You will also need to remove the current light bulb and the light lens cover so that the old socket can be removed. As you will be working around electrical circuits for this repair, be sure to disconnect the power source from the oven before you begin work on the oven.

$5.38

Indicator Light Lens

This is a red indicator light lens for an oven that covers the indicator light for the surface element. The indicator light signifies when the element is on and heated. This part i...

$164.99

Electronic Clock/Timer

This part controls certain functions of your appliance such as bake, broil and the time.

$6.34

Screw

Sold Individually.

$27.40

Light Indicator - 125v

$36.79

Terminal Block Kit with Ground

This part is found between the rear wall shield and back panel.

$5.48

Leveling Leg

This part is sold individually. The leveling leg is black in color and measures approximately 2 inches in length. It is made of plastic. The leveling leg is found underneath your range and may crack or wear down over time. This will need to be replaced if it has broken or gone missing. If you notice your oven is wobbling or uneven it may be due to the leveling leg needing to be replaced. This part can be adjusted to accommodate different heights due to uneven flooring. This is a genuine OEM part sourced directly from the manufacturer.

$8.76

Foot Leveling Leg

Sold Individually. These legs should be adjusted to make your appliance level on uneven flooring.

$156.56

Surface Burner Element with Limiter - 6" - 1200W

$31.08

Clock Overlay - Black

Overlay only.

$28.69

Burner Knob

Sold individually. This knob accepts a D-shaped shaft.

All Parts for the FEFL67DCE
15-28 of 107