FEF366EMD Frigidaire Range - Instructions

We have never been homeowners before and as renters the landlord always handled these issues. Now we are the landlord of our own home. When the heating element in the oven went out we knew one thing...we wanted to fix this issue as affordably as possible. Partselect not only had the best price for a replacement element, but the do-it-yourself video showed us step by step how to do this. The only other thing we had to buy was the 1/4" nut driver because we did not have one. We had the job done in less than ten minutes....and we've been baking ever since. The only advice I would give is to have a second person standing by to flash a light while unscrewing and rescrewing in the attachment plates. We will use this sight again for other minor household repairs.

very easy, put the power poff from the box, removed the (2) screw that holds the part in place, pull out the old one and atach the newone....put the power back....and was done...Was very easy!!!

It was simple. I found the part online with install instructions. I was able to just remove the 2 screws which held the element in and disconnect the 2 connections. Made the 2 connections to the new element and put screws back. All went great and in less than 15 minutes.

Watched the video on parts select. Ordered the part. It arrived earlier than expected. Pulled stove out and cleaned under and all around then installed the element as the video instructed. Pluged the stove back in, pushed it back in place and it worked. This took approximately 30 min. Probably saved me $100 and many days.

Took out the old, put the new in. No brainer.

y-tube repair video. unplug stove. take out the heating element. replace w/ new one. plug stove in. WORKING!!!!

First off, I ordered the part on a Sunday afternoon and received it Tuesday morning with the regular shipping option, simply amazing! The repair was even simpler! - Unplugged the stove. Removed the racks. Unscrewed two screws and disconnected the two electrical ends of the baking element. Removed the old baking element, reattached new element to electrical and secured the screws. Put the racks back and plugged it back in. Total time maybe five minutes tops. Also, the "repair video" for this part was a great reference. Peace of cake!

After pulling the unit away from the wall & unplugging it, I removed the racks to give more room in the oven, I removed two Phillips head screws, pulled the element less than 2 inches to expose the electrical connectors, pulled them off the element ends, removed the baking element from the oven, installed the new element, plugged in the connectors to the element, pushed the ends in less than 2 inches, replaced the Phillips head screws, reinstalled the racks, plugged the unit in, slid the appliance back in place.

Ordered part on a Saturday, shipped Monday, arrived Tuesday, took old part off with screw driver and replaced with new one. Very simple it took 1/2 hour. We probably saved a couple hundred dollars or more by doing work ourselves.

Unscrewed the element, hooked up new wires and screw new element in. Less than ten minutes. The part was at my house in less than 3 days, didn't have to pay a service charge!!!!! I love this place.

disconnect the power from the stove pulled the racks out and took a nutdriver loosened up the screws for the element and disconnected the wires from it and replaced with new element real easy

I disconnected the power cord,took the top back plate off,the switch knob on the switch I was to change,the two screws holding it.pull the old switch out,place the new one in the holder,replaced the two screws that holds the switch and took the wires off the old switch one at a time and placed them on the new one in order on new switch.replaced the back cover and plugged power cord back in.turned range on,it was good. r taite,

unscrewed two screws, exposed wire connections. Disconnected two wires, then placed new element in oven and reconnected two wires, then pushed connectors back inside stove body. A acordless screwdriver made quick work of the two screws and the element works fine. Thank you for your quick delivery.

Watched the online video and followed the instructions. I unplugged the oven, used the nut driver to loosen the screws, removed the old element, hooked up the new element and voila... back in business. I received the part the next day after ordering it!

I watched you vedio and done just as the vedio told me how to change the switch. When I got the switch on pluged it in turned it on and every thing work great. thank you very much.