FCE30610W Jenn-Air Range - Instructions

replaced the heating eliment

Cut the power to the stove. Receptical was easy - just a two prong pull out and remove to replace with the purchcased item. The oven element was easy too but took a little time as you had to unscrew things in a few places, pull out the element, insert the new and rescrew.

Pulled stove out to unplug. Removed screws holding end covers then remove screws on the underside of cover as you face the stove top.Remove knobs.Pull bottom cover forward and up so you can lift it off to see the insides.Remove wires and attach to the new part one at a time. Unscrew old from the front and attach the new one.Put it back together.Done.

simply took off smooth surface top flipped it upsde down on a towel. unbolted the entire burner assembly. matched connections with the new burner with limit switch. replaced smooth surface top plugged it in. no problems. extremely easy fix no repair charges.

i unplugged the stove, waited for it to cool.. took a screwdriver and unscrewed the two screws attaching it to the back of the oven.. unclipped the connectors.. got online, after looking up the serial number and purchased a new one.. the part came in 3 days, clipped the ends onto the connectors, shoved them thru the holes in back of oven, and screwed both of them back into the back of the oven.. and wala, ready to bake!!! yippee! on a sidenote.. we did not use the stove top while the baking element was unattached.. (watch the video) hope this was helpful :)

removed screws slid element out diconnected electric terminals reconnected terminals to new element slid back in replaced screws turned oven on sucess

shut power off to range. removed oven shelves to make getting old element out a lot easier. removed screws that hold old element to back of oven - carefully pulled old element out about 3-4 inches. pulled power connectors off end of element. then installed new element in reverse order. Very easy to do. My wife could have done,but she does baking. I do the repairing. Thank-you for such great service. Greentown joe

turned breakers off unscrewed two screws, removed old element.Reattached wires on new element,put two screws back in. flipped breakers back on and its good to go.

number 1 was to shut off circuit breaker. Just removed 2 screws pulled out element slowly to expose wire terminals, removed wires carefully so terminal was not damaged. Replace element was spot on so install was in less than 5 min.

killed power...removed back of stove...removed switch and replaced it..reinstalled back...powered up

Turn the power off at the breaker first! then I used a phillip head screwdriver and unscrewed the two screws that was holding the metal plates on, then pulled the element out with the wires connected and pulled off the terminals. Then i put the new element in and hooked the wires to the terminals then pushed back through the back of the oven then screwed the plates back on then it was done!

We lifted the glass top, uninstalled the old burner and installed the new burner in it's place. It worked right away - and is still working. No other tricks the new burner was a perfect fit.

The video was good but my model had and additional back plate that wasn't mentioned with 6 additional screws to take out and put back in. Other than that the video explained everything including checking the wires, clips. Oven works great now.

I searched Whirlpool, Sears and random appliance stores and Part Select was the only company to have the lens available. All other manufacturers said the lens was no longer manufactured as a stand alone piece and I would have to buy the entire light assembly. Thank you Parts Select!!!!!