Models > ET20DMXBN00 > Parts

ET20DMXBN00 Whirlpool Refrigerator - Parts

All parts for the Whirlpool Refrigerator ET20DMXBN00

Below is a list of all parts for the Whirlpool Refrigerator ET20DMXBN00. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the ET20DMXBN00
1-14 of 300
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Light Bulb - 40W

Sold individually.


Icemaker Control Assembly

This part is used to help tell the icemaker what to do - it turns the timing cams and the ejector blades. Motor is not sold separately.


Bimetal Defrost Thermostat

This clip-on thermostat will sense the temperature increase in the evaporator during the defrost cycle and will cycle the defrost heater off after the ice or frost is melted.


Condenser Fan Motor Kit

This condenser fan motor operates in a clockwise fashion and carries carries 2W and 115V. It comes with screws, a blade mounting nut, and a cushion. This part provides forced-air cooling for the condenser coil.


Single Water Inlet Valve - 120V 60Hz 35W

Also known as a Water Solenoid Valve. The water inlet valve is a solenoid-operated switch that, when activated, releases water from the supply line to the water valve and into th...


Icemaker Water Fill Tube Kit

This kit comes with a fill tube and a compression nut.


Door Shelf End Cap Set

This door shelf end cap set contains two white end caps. Each end cap can be used as either the right or the left side. These end caps also come with adhesive strips and an instruc...


Light Rocker Switch

This light switch is triggered by the door opening and closing.


Shelf Support Stud

This is a 12 piece kit.


Water Fill Cup and Bearing


Water Tube Kit

This tubing is 1/4'' in diameter and comes with 2 inserts. This tubing may be longer than the original, and may have to be cut.


Evaporator Fan Motor Kit

The evaporator is found in the back of the freezer. This kit comes with two mounting grommets, two sleeves (not to be used on porcelain models), two #8 mounting screws, and a push-on fan blade.


Touch-Up Paint - White



Light Socket Kit

The bulb is sold separately.

All Parts for the ET20DMXBN00
1-14 of 300