EMO3000HCC04 General Electric Microwave - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
turntable would not turn
I realized the turntable coupler had broken, but part of it was still in place. I read most of the other installation instructions, and pulled the coupler off. I did not use any tools other than the vacuum. Then I used my wet/dry vac to try to get the broken piece out that had fallen to the bottom of the microwave. I was unable to get it out. I put the new coupler in place (has a half moon base you should line up with the center) and I pushed down until I heard a click. Turntable works good as new! Simple, easy, if I can do this, anyone can. Reading the other responses was helpful. Easy order/quick delivery. Would recommend to friends/family.
Parts Used:
-
Judy from Powder Springs, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Broke the cooking tray and turntable coupler
Popped the coupler on and put the cooking tray on top of the coupler.
Parts Used:
-
CYNTHIA from BEAR, DE
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Micro turntable was not working properly.
I watched the video on how to replace the motor and it was as simple as you said it would be. Just need the correct short handle screwdriver. It is very simple and easy. Thanks for the video.
Parts Used:
-
Barbara from Tamarac, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Bulbs were ole and broke off inside socket
Took the light socket out and replaced it.
Parts Used:
-
William from Columbus, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!