Models > EI32AF65JS1

EI32AF65JS1 Electrolux Freezer - Overview

Get Parts and Repair Help for EI32AF65JS1

If you know the freezer repair part you need, you can browse the list of all parts on the EI32AF65JS1, or you can search by name or part description. You can also find your part by where it is located on the EI32AF65JS1 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your freezer. We’ve also included any installation videos we have for EI32AF65JS1 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the EI32AF65JS1 [Viewing 5 of 5]

$9.65

Thermostat

This thermostat regulates and keeps the temperature at a constant temperature for the freezer section.

$21.76

Water Inlet Valve

$16.02

Air Filter

$111.52

Ice Maker

$8.00

Adjustable Leveling Foot - Black

Sold Individually.

$37.43

Evaporator Fan Motor with Wire Harness - 115V

This evaporator fan motor is located in the back of the freezer, and circulates air over the coils. These coils will convert the heat into cool air, which is then circulated.

$4.38

SCREW

$4.95

SCREW-SHOULDER

$45.80

Defrost Heater

This part is located at the bottom of the evaporator. The defrost heater heats the evaporator in the defrost mode of operation to keep the cooling coils from frosting over. The th...

$29.57

ICE STRIPPER

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Broken ice maker

  • Customer: Juan from Miami FL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Socket set
  • 46 of 66 people found this instruction helpful
Unplugged faulty ice maker, removed two screws holding it to the refrigerator and took it out. Reversed the operation with the new ice maker and after a few minutes presto, we have ice. read more

Was not filling the ice tray full.

  • Customer: Orville from Garland TX
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver
  • 17 of 25 people found this instruction helpful
I had put in a new ice maker and it still had the problem, (I needed the Ice maker anyway) I installed the vale and while I was at it I put a five year filter on the water line that went from the value to the Ice maker, it took less than one hours, the ice is making like it did when it was new, I could not be more please at theis time. Thanks for your Intere... read more

Freezer thawing at about 20 degrees

  • Customer: Nathan M. from Bunnell FL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 7 of 7 people found this instruction helpful
Turned freezer off at themostat and unplugged freezer. Removed 2 screws at front 2 at the back and 2 at the top. Lowered top cover and removed evaporator fan bracket (2 more screws) removed themostat capulary tube( 1 screw and bracket) then unplug fan motor. Removed motor from bracket (2 screws). Put on new fan motor then removed fan blade from old motor ... read more