All Installation Instructions for General Electric Range EER3000K01TW

f-2 or f-3

remove two bolts in on sensor and slip thru back un plug and reverse to put in

Parts Used:

Temperature Sensor

daniel from gap, PA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers

Was this instruction helpful to you?

Thank you for voting!

oven wasn't heating

after reading instructions on this site , i knew to take the 2 screws out of the element in the rear of the oven. As soon as i saw the wires i put the clamps on them so they wouldn't fall back into the wall of the oven, then i just pulled off the old element and pushed on the new. Put screws in with nut driver and turned power back on.

Parts Used:

Bake Element - Push On Terminals - 240V

gerald from lake isabella, MI
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers

Was this instruction helpful to you?

Thank you for voting!

The broiler elemet had burned through

First I unplugged the range. Then I removed the hex head screws, disconnected the two flag connectors and removed the old element. Then I reversed the process with the new element. I plugged the range back in and set the control to broil. It works like a charm!

Parts Used:

Broil Element

Cyndi from Beaverton, OR
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver

Was this instruction helpful to you?

Thank you for voting!

Orange light "Hot Stovetop" lense broke off.

Parts arrived in record time and the right parts. The detailed diagram was so helpful in finding exactly the part I needed to order. Was so easy my girlfriend with no mechanical or electrical experience completely helped me through the entire project. She secured the electrical breaker to the range, and I had the top back to the oven removed. I showed her how the little white box simply slides off the lens cover, then replaced the new one in the holes and slide it back on. Secured the back and she turned on the breaker back on...and all lights work. Thanks for making this project easy, simple and quick.

Parts Used:

Lens

John from Woodbridge, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers

Was this instruction helpful to you?

Thank you for voting!

ge oven door glass replacement

the door glass was shipped super fast and was easy to replace. the only complaint i have is i wish they had some instructions with it i found some on utube. all you do is take the door off the hinges makes it alot easier to work on.

Parts Used:

Exterior Door Glass

WILLIAM from Pinellas Park, FL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Oven broiler not functioning

Pulled unit away from wall with help of husband and followed instructions.

Parts Used:

Broil Element

Mary Ellen from Chicago, IL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable)

Was this instruction helpful to you?

Thank you for voting!

Element burnt out

Repairs went well. By the way you guys rock! From the easiness of your website to receiving the part a day ahead of schedule! We are baking again.

Parts Used:

Bake Element - Push On Terminals - 240V

Edgar from Valrico, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

my original element some how broke, so the baking element was not heating the oven..

Very simple fix, after unplugging the range to shut off power, there were two screws to remove on the inside of the oven, and also removed the panel from the back with only four short screws.. the fix was simple and cost a lot less than what I would have paid to purchase a new range... The part arrived shortly after the order was placed...

Parts Used:

Bake Element - Push On Terminals - 240V

Marilyn from Stafford, VA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver

Was this instruction helpful to you?

Thank you for voting!

Oven element burned out

Remove one screw replace element and return the screw.

Parts Used:

Bake Element - Push On Terminals - 240V

John from Charlotte, NC
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Hard to move drawer in and out because the rear drawer supports broke off.

Repair was very easy - less than a few minutes - just had to screw in 2 screws to the new drawer supports.

Parts Used:

REAR SUPPORT

Steven from Lansdale, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

8 inch burner was burnt out

replacement was easy. pulled away the stove from wall. unplug the stove. open oven door. remove the two hex head screws holdings stove top. raise the stove top in the front. supported stove top with a 16 inch piece of wood. place New Burner under old burner. remove old burner remove wires remove old burner and place it on top of new burner connected the wires from burner to new burner. install new burner. remove support lowered top down. plugged in stove tested. .burner. burner w.ork fine. reinstall hex head screws back top. pushback stove back into the wall. testes over again. all the stove work done.

Parts Used:

Large Haliant Burner with Limiter - 8"

Luis from Kissimmee, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Old element disintegrated after a cleaning cycle

Removed two screws holding the element in place, unhooked the spade connectors and inserted the new ones in their place; put the screws back in. Big deal.

Parts Used:

Bake Element - Push On Terminals - 240V