EER3000H02KC General Electric Range - Instructions

The repair went very well. All parts were an exact fit. I was very impressed. I ordered the parts on a Tuesday and recieved them on Thursday with one rack backordered. On Friday the second rack was delivered. Very professional service. Thank-you.

There is not much to it!

Simple; unplug stove, take back cover plate off. Pull off front knob. Remove screws holding in switch.Replace wires one at a time to avoid dis-connections - or make color coded diagram. put back together. DONE

Turned off the power to the stove. Removed the oven door, Removed two screws holding the metal housing from the oven wall. pulled the assembly forward, removed the two electrical wires from the back of the socket, installed new gasket on back of metal assembly,inserted the wires thru the hole in the metal assembly, attached the wires to the new socket, pushed the new socket in place making sure the two holding clamps were in place, screwed assembly back in oven wall, replaced new bulb, replaced glass cover over bulb, Replaced oven door, turned the power back on, Light works like new.

Parts fit perfect, and order them on Wednesday and they were delivered on Friday morning. Excellent service. Thank you. Happy customer.

Unscrew the two nuts in the back of oven holding the bake element,carefully secure the electrical connections with plyers so they won't go back into the stove. Slowly, pull the bake element out of the electrical sockets, one at the time. Next insert the electrical parts into the new element ends, screw back the nuts, and done!

It was easy to replace it. Just remove the screws and unplug each wire and plug them back. The problem was to take off the plate cover that has the printed letters on. The plate cover cost more than the Electronic Control Board.

Removed the two racks, remove two screws from the back of heat element, carefully pull element out, unplugs wires from element, install new element in the reverse order

Moved the stove away from the wall and unplugged. Removed screws from the back of the stove. Took out old element and replaced with new. Replaced the screws, plugged the stove back in and turned on the oven to make sure everything was working. Everything working fine and I baked a cake. I was also very happy how quickly I received the part. I ordered it late Thursday afternoon and received it by the following Saturday morning. Thank you.

I ordered the part on a Monday and Tuesday afternoon I received it! I went a route I often take first. I read the instructions of others before starting my job and opened the top of the range. There are two screws under the range top in front near the oven door, one on either side, that must be removed. After this I opened the top of the range and positioned a piece of 2X2 about 20 inches long at an angle to hold the top up while I worked on the burner. I then used my phone to take a close up picture of the old burner while in place in my range so I could refer to it when putting the new one in place. I then took a pair of needle nose pliers and pulled off the wiring, then removed lock washers under the burner and removed the old burner, being careful not to lose the washers and springs. I took the new burner and layed it along side the old one to see exactly how it would be placed under the glass cover. I replace the springs and lock washers then referred to my photo and replace all the wires to the burner as they had been. Then lowered the top in place and put the screws back in place. That was it. I'm a 67 year old female, if I can do this, anyone can!

ordered it and it was here within 48 hours. I was so surprised to see it so quicly. It took me just a few minutes to put it n and tighten it up and all is well now. Piece of cake!

Difficulty was in determining the right model number and part number of a switch. Noted that the left front burner came on when the switch for the left back burner was turned on. By inspection I found the left front burner switch had become faulty by actually hearing an electric arc in the switch and smelling the oder in the switch. With help from the person I called I was able to determine that the Model Number on the actual stove was wrong. It had an extra 0 between the W and F which she said was a common error in the GE model number. I then gave the switch number I found on the switch to the contact person and she was able to verify the right part number. It was relatively easy to replace the switch by taking off the back upper plate then taking off two screws that held the switch to the stove. The part came quite quickly once ordered. Sears repair wanted $75 just to diagnose then the cost of the part. I got the switch for $69.

The part arrived the very next afternoon. My husband was at work, so I decided to give it a try. After reading other repair stories, I began by shutting off the breaker to the oven. Next, removed the racks. I then used a socket to remove the two screws on back plate. I then VERY CAREFULLY and slowly pulled out the element a short distance, just to see the connections. I used a magnetic refrigerator clip to hold onto the clip so it wouldn't go back into the insulation in the oven:(someone else suggested this---good suggestion) I slid off the connectors and slid them back onto the new element. Pushed it back in and put screws back on.

This website made it so easy for me to find the part I needed! Shipped promptly with no problems or delays and the rack fit perfectly in my oven.

Our son came to visit! The element was replaced in no time!