All Installation Instructions for General Electric Dishwasher EDW6060L15SS

Leaking at the valve

Just like the video and replaced it

Parts Used:

Water Inlet Valve

Brian from DERRY, PA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Wrench (Adjustable), Wrench set

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

upper dishwashr rack lost the end cap and the rack kept coming off the track when you went to push it back in it would jam into the track and all the dishes would bang and fall.

placed the end cap into location and forced it into place. Fixed -and we are all much happier!!

Parts Used:

RACK SLIDE END CAP

donna from walworth, NY
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Roller Broken on dishwasher

Popped out Old Roller, put in new one, pushing it together with a pair of pliers.

My only regret is that i didn't check the other side of the dishwasher... the other roller was broken also, and now i have to pay 5.95 shipping & handling for a .29 cent item

Check all your rollers before you buy just one!!!!!

Parts Used:

Dishwasher Dishrack Rollers and Axles

Sean from Cicero, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Cap had broken off the top rack, it kept sliding down

I just had to play around with it to attach the new cap without breaking it.....never did this before but eureka! it worked.

Parts Used:

RACK SLIDE END CAP

Cindy from Davidson, NC
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The top drawer of the dishwasher would extend past the support rails.

The top right rail, facing the dishwasher, has a self lock tab. Using pliers, straighten the lock tab, insert the cap and then restore the lock tab to it's original position.

Parts Used:

RACK SLIDE END CAP

Daryll from Newville, PA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

wouldn't drain

Removed the dishwasher to get at the defective parts and removed,than replaced the two check valves and reassemble.

Parts Used:

Check Valve Flapper

JOHN D. from GOSHEN, IN
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)

3 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

PS259168 Replaced broken end cap on upper dish rack

No tools needed for this half-minute repair. Just bend the flexible plastic tab on the back of the end cap until it slips into the metal rail and the end cap snaps into place. Couldn't be easier or simpler!

Parts Used:

RACK SLIDE END CAP

Stephen from Waterville, ME
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

New install missing drain tube and clamp.

Purchased new $1400 dishwasher from sales floor for $699. Cosmetically perfect, but missing drain tube and clamp. Seemed like a good deal... and it was. Needed parts were $34. Install of this machine was a breeze, and it is suoer quiet...I need to get down on the floor and listen for water flow to know that it's working. Really.

Parts Used:

Drain Tube Kit

CLAMP

David from Norwell, MA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers, Wrench (Adjustable)

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

missing toekick

two screws, two minutes, all done

Parts Used:

TOEKICK Assembly

KENNETH from WAPPINGERS FALLS, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

3 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Leaking from front

I removed the old gasket very easily as there wasn't even glue holding it in place. The new gasket just pressed right into a slot and makes a water tight seal.

Parts Used:

Tub Gasket

David from North Charleston, SC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

its wasn't latching so the dishwasher wouldn't work unless i held the door in the whole time

I called your tech and she sent me a awesome video that made it so easy to fix on my own

Parts Used:

Door Latch

Michele from NEOLA, UT
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Replace the middle flatware basket

So easy, even I was able to do it. Slide tabs back on defective basket and remove both sides, then slide the tabs onto new basket and place in dishwasher. All Done!

Parts Used: