EDW5100N00WW General Electric Dishwasher - Instructions

pulled switches flicked leaver worked when itwanted to and not every time. I removed then shorted then rechecked everthing worked. got on line ordered parts good price fast service fixed 30 min when they came in saved money.Thank God! 20.00 fix instead of 200.00 +

First I removed the excess water by using my shop-vac both inside the machine as well as near the bottom drain valve. After cleaning out that valve (which somehow had accumulated a pair of underwear) it was apparent that the drainage pump motor was no working (loud hum, not spinning). Replacement was easy, folowing instructions found everywhere on-line. Now the machine is working perfectly again.

got replacement valve from part select and works like new this dish wash er is 24 years old. believe it or not did the job with pair of pliers and screw driver. used pliers to take off clamp and screw driver to take out 2 screws and replaced the valve the same way in reverse

Just pop them in and you are done, less than a minute to install both lids.

We googled, "thumping noise" when running the dishwasher and one of the possible reasons was the Lower Spray Arm. So, we purchased a new one and replaced it. Problem solved.

Replaced the part by taking off the srews on the inside of the dishwasher door (all of them)to get to the backside of the soap dispenser. Remove an electrical connector by pulling (had to pull off using pliers as it was really on there). Then a couple of screws hold to to the inside of the door. Pretty straight forward.

Removed the screws holding the inner door panel from the door. I just flipped it over and used the weight of the removed panel to hold down the spring loaded door. I took note of the position of the old seal and then removed it. I cleaned away all of the accumulated soap residue. The new seal was positioned by just sliding it into place. I flipped the door panel over and replaced all of the attaching screws. Don't try to press the new seal into place. Slide it onto the lip of the door panel.

The diagram was very helpful to make identifying what parts were needed. Very prompt in sending the parts,in less than 24 hrs! Would highly recommend ordering from here.

I troubleshot the problem down to the 2 small interlock switches and the cover that protects them. They are directly behind the the door handle mechanism. The switches were shaky and the cover was bowed out. Ordered the 2 switches and the cover, next day mail. The delivery charges were more than the parts. Easy fix. Saved $90 for the repairman visit plus what ever he gets for his time and his cost for the parts.

I opened the box, cut open the plastic air bag, and put the part where it belonged in about 5 seconds. Saved me gas, phone calls, service call, time, anyone can do this stuff! I am a female with memory problems, but I did it all with no help! Thanks for the on-line service! Sandra

It took no time at all to identify where the water was leaking from. I accessed a parts breakdown illustration of my dishwasher, identified the part, ordered it and three days later my leak was fixed. Hose and water inlet valve assembly was easy to swap out. I estimate I saved myself about $150.00 by doing it myself.

unscrewed old part and rescrewed new part...easy....works like a charm....saved lots of money from a service call. Parts select was a great company to work with...fast shipping. thanks

replaced the axles and the wheels

Was so easy my wife did it made my day.

I ordered it online and g0t it the next day. I found out why so fast. The parts select store was 3 miles from my house and I paid $7. 50 To have it delivered by fedex. I opened the box and set it in the dishwasher. I hope this helps someone. It did me.