Quick Question!

Have you ever purchased from PartSelect.com before?

Models > EDW2020F00BB > Parts

EDW2020F00BB General Electric Dishwasher - Parts

All parts for the General Electric Dishwasher EDW2020F00BB

Below is a list of all parts for the General Electric Dishwasher EDW2020F00BB. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the EDW2020F00BB
1-14 of 76
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$15.80

Silverware Basket with Lids

This is a basket for washing flatware or silverware in your dishwasher.

$11.86

Piston and Nut Assembly

This is used for the check valve.

$54.81

Water Inlet Valve

This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the d...

$4.27

Hinge Arm Link

$21.65

Drain Solenoid and Bracket Assembly

This valve opens in order for the water to drain out of the dishwasher.

$10.64

Rinse Aid Fill Cap

This part helps keep the rinse aid the dispenser until its needed.

$135.86

Lower Dishrack Assembly with Wheels

This is a dishrack kit that includes the complete rack with wheels and also the silverware basket (not pictured).

$13.83

Pump To Wash Arm Rubber Connector

This connector has female threads.

$42.91

Drain Solenoid Kit

This kit includes the armature and linkage assembly.

$18.87

Door Latch Kit

This door latch kit is used for dishwashers.

$37.50

Upper Rack Slide

This slide is mounted to each side of the upper cabinet wall. The dishrack wheels roll inside this track, which guides the upper rack.

$49.72

Long Front Panel

$13.39

Third Level Spray Arm

Water is forced through this spray arm by the unit's pump and motor assembly. The force of the water propels the spray arms, spraying water and detergent onto the dishes on the dis...

$19.99

Impeller and Seal Kit

The impeller and seal kit is used in a dishwasher. The kit includes all the parts needed to do this repair, including the impeller, seal, blade, filter, skidder and skidder holder. If your washer is leaking, not cleaning dishes properly, or not draining, then replacing some parts in the pump can help solve the issues mentioned. The tools needed for this installation project are: 5/16 nut driver, 1/4 inch nut driver, flat-blade screwdriver, Phillips screwdriver, and pliers. Refer to the manual provided by the manufacturer for installation instructions and accurate guidance. Remember to unplug your dishwasher from the power source and wear work gloves as a safety precaution.

All Parts for the EDW2020F00BB
1-14 of 76