Quick Question!

Have you ever purchased from PartSelect.com before?

Models > E23CS78HSS1 > Parts

E23CS78HSS1 Electrolux Refrigerator - Parts

All parts for the Electrolux Refrigerator E23CS78HSS1

Below is a list of all parts for the Electrolux Refrigerator E23CS78HSS1 - Side-by-side. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the E23CS78HSS1
1-14 of 324
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$59.10

Water Inlet Valve

The water inlet valve is also known as the water inlet valve assembly and is compatible with your refrigerator. The function of this part is to release water from the supply line w...

$8.38

Hinge Bearing

Sold individually.

$14.48

Defrost Thermostat Kit

If you find that there is excessive frost in your freezer, or the freezer will not defrost, you may need to replace the defrost thermostat. The defrost thermostat kit comes with th...

$97.59

Ice Maker with Cover - 8 Cube

This Frigidaire ice maker includes the ice mold and control device. The ice maker receives water from the water inlet valve and stores water in the ice mold until it freezes. Ice is automatically ejected and the process continues until the storage bucket is full. Your ice maker should be replaced if ice is not being generated, stored, dispensed, or the ice maker has been damaged. Replacing the ice maker is an easy job and only requires a 1/4 inch nut driver. Before you start this repair, make sure your refrigerator is unplugged. For help with this installation, check out the video below.

$27.54

Door Closing Cam

Sold individually. This cam is located at the bottom of the fridge/freezer door.

$29.53

Dispenser Crusher Housing

This dispenser crusher housing may also be known as a refrigerator ice crusher housing, and is compatible with your refrigerator. The function of the dispenser crusher housing is to shield the ice crushing blades within the ice container. To make this repair you will need a Phillips screwdriver, a flat blade screwdriver, a quarter-inch nut driver, and a pair of channel lock pliers. For this installation, work gloves are recommended. Note that this piece may look different or be a different color than the original, but this part will fit and function in the same way as the original part.

$37.67

Crisper Glass Insert

$7.30

Screw

This screw is sold individually.

$7.72

DRUM

This part helps push the ice threw the front plate to be crushed.

$31.27

Drive Blade

The drive blade helps rotate out cubed or crushed ice.

$29.05

Pan Cover Insert

Glass Only. Frame not included.

$9.49

Upper Hinge Bearing

Can be used on either Fresh Food or Freezer side of the refrigerator.

$5.96

SCREW-SHOULDER

Sold individually.

$0.54

SCREW-#8-18 X 1/2

All Parts for the E23CS78HSS1
1-14 of 324