Models > E23CS75DSSG

E23CS75DSSG Electrolux Refrigerator - Overview

Get Parts and Repair Help for E23CS75DSSG

If you know the refrigerator repair part you need, you can browse the list of all parts on the E23CS75DSSG, or you can search by name or part description. You can also find your part by where it is located on the E23CS75DSSG by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for E23CS75DSSG parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Crisper Cover Support - Front

This part can be used for the front support. Sold individually and mounts to the inside cabinet wall.


Crisper Support - Rear

This part mounts on the inside of the wall. Sold individually.


Water Inlet Valve

This part may appear different than the original, but is an authorized manufacturer replacement. This part releases water from the supply line when it's activated.


Hinge Bearing

Sold individually.


Defrost Thermostat Kit

This kit includes the clip, leads and heat shrink.


Run Capacitor

This part is attached to the compressor. It helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.


Door Closing Cam

Sold individually. This cam is located at the bottom of the fridge/freezer door.


Crisper Drawer Cover - NO Glass

This part contains molded glide rails for the crisper pan. It does not come with the glass shelving. The glass is not included. Must be ordered separately.


Dispenser Crusher Housing

This part may look different or be a different color than the original, but will fit and function the same as the original part.


Rear-Mount Ice Maker Assembly

This icemaker mounts to the back panel in the freezer section of the side by side refrigerator. This kit includes the icemaker, power cord, bail arm and fill cup. NOTE: Per factory if you are having an issue with the arm hitting the shelf, you will have to replace the shelf with part # PS1152582.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

water leaking out of refrigerator

  • Customer: Jose from Alexandria VA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Wrench (Adjustable)
  • 276 of 327 people found this instruction helpful
In my specific appliance the water valve is located in the bottom right hand corner looking at it from the back. To get to it I remove the thin layer of cardboard the covers the back of the fridge. I then proceeded to disconnect the 1/4" copper tubing which is the water feed coming out of the wall. Then I removed the screws that hold the valve assembly in p... read more

Support studs were broken

  • Customer: Peter from Amherst NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 203 of 209 people found this instruction helpful
Used pliers to remove the residual broken stud that was still attached to the wall of the refrigerator, and then just pushed the new part in place. The longest time was spent in removing the food and crisper drawers. read more

icemaker stopped making ice

  • Customer: David from New Bern NC
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 174 of 206 people found this instruction helpful
Even though my wife said that our icemaker broke, there was actually nothing wrong with it. It was the valve that let water flow in during the 'harvest' cycle.
A real easy way to test the icemaker without voltage and current measurements, is to fill the tray by hand with a little cup of water; wait till the water freezes and see if the maker dumped the ... read more