DWC6402ABE Maytag Dishwasher - Instructions

Pulled the old gasket out, put the new one in place.Used a screwdriver and fingers to push the new gasket firmly into its seat. Repair done. I've done a few repairs in my day, none easier than this.

Followed directions on site video. Total time 5 minutes. Leak repaired

Part was extremely easy to find. Part arrived very quickly and fit Perfectly. Easy repair.

I grabbed a hold of the old gasket and removed it. I then took the new gasket and set it in place on one corner. I inserted it around the groove and with just one adjustment for length, I took the round bottom of a spoon to set and smooth the gasket into place. No more leaks. 5 minute fix.

Replaced door seal, very easy!

Placed it back together. Part select was right on time and used this companys site for yrs

Opened the box and put the new Silverware Basekt in the Dishwasher. Everything was atttached, no labor involved. Loved it, wish I had thought about ordering it earlier. Ordering, Receiving and Installing was EASY and QUICK. Thank You!

Removed the upper rack rail stops. Removed the upper rack by pulling outward until the rack rollers cleared the rails. Attached the new roller on the upper rack. You can look at the other undamaged rollers to see how they lock into place. re-install the upper rack by feeding the upper rack rollers back onto the rails. Install the rail stops back into the rail ends,and the job is complete. VERY EASY!

I had to call an appliance repairman to come fix it. If I would have been able to pull the dishwasher out, it would have been a simple fix. It would not come out and I loosened to water line trying therefore causing more problems.

I knew I needed a faucet adapter, but thought I could just go to my local home depot and get the part...not so much. After 3 trips and not getting the part I truly needed I ordered the part from partselect. I received it literally the day after I ordered it, screwed in place with no tools, attached the coupler/hoses to the faucet and washed dishes. I wish I would have ordered the part from partselect before even bother with home depot. I would have saved myself a lot of trouble! Extremely happy! Thank you!

WE installed a new door gasket. However the machine still had a leak only on the left side. Called a tech and he came and said the gasket was installed backwards. Apparently the original one was also because we installed the new gasket exactly the way the old one was. We are all set now.

I had to cut the old rack for 2 axles and add 2 wheels from the old rack to the new one that was sent. the new one had 2 less wheels.I used white zip ties and wheels from the old rack. Placing the wheels in the right place I used the zip ties to hold them in place. Without the extra wheels like the old rack had the new one would fall into the bottom of the dish washer. Working just fine so far.

Top holder was turning black and disintergrating. I orderder the part and the box arrived but I havem't had time to install it

ordered the basket and put it in its place.

I opened the door, and looked at the upper shower fixture ( a spining arm with holes in it) and saw there was a star shaped object that appeared to be the attaching screw device for the top shower. With my rignt hand I grabbed the points on the star and easily rotated them counter-clockwise, until the upper shower fixture came off in my hand. Next, I removed the top end of the pre-formed plastic tube from the top of the tub. I laid on my back so I could see under the tub (where the plastic tube is joined to the actual pump). The tube is connected to the tub via a rubber hose fitting. I unscrewed the rubber hose clamp and removed the pre-formed plastic tube. Disassembly was then complete and you simply reverse the procedure. Took less than 15 minutes. My diswasher is now back to working properly.