DW860UQB Jenn-Air Dishwasher - Instructions

First replaced the door seal, that slowed it down substantially, but not totally. Next replaced inner door foam insulation strip and that took care of it, no more leaks. There was some corrosion evident after I scraped off the old strip, sanded that smooth with emery sandpaper and then installed new strip. Job done!

I just opened the package, pulled out the baskets, separated them and put them directly in the dishwasher. The video showed the part and size of the baskets which was very helpful. The delivery was EXCELLENT!!! I would purchase from PartSelect again!

Followed the outstanding video instructions. Your company is fantastic. Your attention to detail, the quick shipment (one day) and video ... stellar! We will be referring your company to all!!! Thank you!!!!

replaced with new gasket and it works great.

I took the old one out of the dishwasher and put the new one in. The new one is much nicer and heavier than the original one!

Followed the video on the websight

good just screwed in

Because mine is a portable dishwasher, I had to remove top first. the sides and back are one complete unit. the torque screws are in the front, 2 on top, and 2 in rear. Then the panels can slide back to access the spring. Replace the plastic piece & hooked on the spring. Reassemble in reverse order.

Well, I haven't gotten the right part yet. I'm such an idiot that I've ordered the wrong part twice now. So, figuring that 3's a charm, I'm going to try to get the right part now. I do have to say that part select has made it amazingly easy to return the parts. And both of the first 2 (wrong) parts arrived within 2 days of ordering. I'm pretty impressed with this company. Now, if I can just order the right part, I can tell you how the installation went!

Just dropped it in and that was it.

Took old basket out, put new basket in

Took out old, put in new; threw away old. :-)

Followed the video found on the website. Very simple repair. Saved $120 by getting the part and fixing myself.

I pulled the old rubber gasket off put the new one on and then took the back end of a kitchen knife to push it in all around the door to create a solid seal

First problem was finding out whether Dishwasher had power at all, since nothing happened when you tried to start it, and I really didn't want to have to pull it out and disconnect the power cables at the box on the back of the dishwasher. Used the video instructions from PartSelect and opened the inside door panel and exposed the switch, then put a continuity tester (light with two prongs) across opposite sides of switch (white one side, black the other). With the test light on, knew I had power and was able to locate circuit breaker to turn off power to dishwasher, all without dismounting it from the cabinet at all. From there, followed the video. Hardest part was disconnecting wires from the old switch, which was slightly corroded. Plier trick on video didn't do it, and had to use large screw driver blade to carefully lever wires off of the switches. NOTE: Look at the new switches before doing this, and you'll be able to visualize how the wire clips slip on the switch connectors. Great site, and dishwasher started right up after the repair.