DW761W Jenn-Air Dishwasher - Instructions

I pulled out the dishwasher. Saw that a plastic part linking the door and spring was broken.I was able to ID the part easily on PartSelect. The part came quickly and was installed within 30 minutes. Dishwasher feels like new.

replaced parts with ones ordered, quick and simple

I slid the dishwasher out about a foot and easly replaced the Door Spring Linkage. I took more time to remove and replace the screws than it did to replace the Door Spring Linkage. Very easy repair that anyone can do.

I watched the video when I ordered the part and then watched it again just before installing the door gasket. I pulled the existing gasket out of the channel. The air space inside the new and old gasket is triagular so make sure you take note which side of the gasket goes into the channel first(you'll understand when you see it). I wiped out the channel and gently fed the gasket into the dishwasher's channel with my fingers. Before I installed the new gasket the door latch closed with no resistance. Now I have to push the door in hard with my thumbs at the top of the door in the middle to get it to latch when I run the dishwasher. It all was so easy and there is not a drop of water leaking. The week before I ordered the door gasket I ordered and installed the tiny little gasket that seals the detergent door latch. I didn't realize anything was leaking at that time. The only reason it was discovered was because the detergent door wouldn't pop open to release the detergent and we were working on that issue. When taking the dishwasher door apart we noticed that the cardboard insulation was wet as well as the other insulation and could tell it was coming from the circular opening in the metal. We dried out the cardboard. Then cut off the bottom that had been wet. We cut a double thickness of cardboard to size from a large box. Then taped it on to the bottom of the piece that hadn'et gotten wet. It's important to have that cardboard intalled because it protects the outside of the door from getting dented as well as for sound. When the new little gasket was delivered we installed it and the detergent door worked fine again. We ran the dishwasher through a cycle and that's when we discovered that the door gasket was leaking. I wish I would have ordered both gaskets at the same time. If I would have read the postings on this website when I ordered the detergent door gasket, I would have ordered the door gasket. Oh well, everything worked out. I just spent an extra shipping charge. Still an enormous savings over hiring a Maytag repairman.

The hardest part was getting the lid back off. I had tried using the dihxeasher while waiting for the spring. Once I figured that out, it was fairly easy. Once I got the longer pin out, it was just a matter of figuring which way to put the spring in. Took me a few tries without the instructions

Following the instruction video, I removed the door panel and the inner cover to expose the door switch. I disconnected the wires from the switch and removed the switch from the door. I then removed the handle from the switch and installed it into the new switch housing along with the new switches that I purchased from Parts select. I installed the new switch assembly, replaced the inner cover and the door panel. The repair was easy and took about 20 minutes to complete.

We took the hoses off, cleaned all the hard water deposits and screens. The water would fill once but not a second time. We ordered the water valve and valve switch. We put the new water valve on and "miracle" it worked perfectly. We didn't need to replace switch. Let me tell you this is one happy housewife now. Ordering the parts on-line was very easy and they arrived as they said they would. Thanks for the great service.

Pulled out old gasket, checked to see which side faced the door, found the middle of the new gasket, started at top middle and pushed the gasket into place. Easy as pie!

Replacing the door switches was easy. The video & directions are spot on. This did not fix my problem. Called a repair man. He came and found a broken wire right in the hinge between the main unit & the door. It was very easy to see if you were looking for it. Once you have the inside cover off, check the wire bundle that runs from the unit to the door. He just butt spliced the wire back together and I’m up & running again. He said this is very common in older machines.

Removed the old door gasket. Adjusted the new gasket to fit evenly on both sides. Removed the seven hex screws. Two nuts holding the cover over the backside of the cover for the soap dispenser. Removed the old grommet, replace the new one. Cleaned up the inside and replace screws. Truly was easy.

Got all info from your site, thank you. I replaced the door gasket and water deflectors and I still had a small leak. Replaced the gromet and the o ring in the soap disp. And still had a small leak. I adjusted the door latch to close a little tighter and that solved the problem. You have a great site. Keep up the good work.

The hardest part was figuring out how to get the dishwasher out from the cabinet. Your instructional video said "no tools are needed" but that turned out to be untrue.

Followed the video on your site. Removed old gasket, put in new one...easy, breezy! For good measure, since we weren't sure where the leak was coming from, installed a new water deflector as well, which was also extremely easy. Out with the old, in with the new and no leaks!!

It was very easy. Simply remove old seal with a pair of needle nose pliers. Clean or scrap any build-up from old seal location and then push-in the new door seal. Close door and let the new seal form to the door.

Took it out of the box and transferred the handle and the lid from the old basket to the new one. That's it. Less than 5 minutes.