Models > DU943PWKQ0 > Instructions

DU943PWKQ0 Whirlpool Dishwasher - Instructions

All Instructions for the DU943PWKQ0
271 - 285 of 398
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
broken bracket
removed broken pieces , replaced with new your diagrams and part info was perfect, just remove and replace
Parts Used:
Screw Screw Cover - White Spray Arm Mounting Bracket
  • Anthony from Oroville, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
soup lid spring and pin broken, wouldn't pop open
I just followed the video, and it now works perfectly! Thanks SOOO much! great site, great info.
Parts Used:
Spring, Lid Pin (Lid Hinge)
  • Heather from everett, MA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers
Was this instruction helpful to you?
Thank you for voting!
Failed to get dishes clean
Shut off water supplyand removed front cover below door. Remove flexable water line (wrench set), valve and bracket (nutdriver), and input hose (pliers). Installed flexable line on valve, replaced input hose on valve, then installed valve and bracket. Found screen on input to valve almost completely blocked with buildup of materail. Replaced front cover. result, bright, clean dished.
Parts Used:
Water Inlet Valve
  • Wayne from Baltimore, OH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Wrench set
Was this instruction helpful to you?
Thank you for voting!
missing part
screw it in then hook up the hose.
Parts Used:
Drain Check Valve with O-Ring
  • Ruby from Saint Marys, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Dishwasher was not cleaning properly, leaving food grime on dishes
Noticed an excessive slack/wobble in bottom spray arm. Found video on Part Select website describing the exact model number of dishwasher and how to replace bottom washer arm bearings. Again found part breakdown of assembly on PS website and ordered the part. Received the parts the next day. Replaced bottom bearings on spray arm per video. Took all of about 20 minutes. Wife tested dishwasher with a load of dishes. Works like new. I will personally recommend Part Select to anyone doing a home appliance repair. Again Thanks.
Parts Used:
Wash Arm Bearing Ring Lower Sprayarm Seal
  • Nolan from Stafford, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Dishwasher wasn't cleaning thoroughly, although it seemed to be operating properly. The wife was demanding a new machine.
The upper and lower arms seemed to not spin freely enough, although the plastic bearings looked okay. I went ahead and bought new ones, as well as the little spinner which attaches inside the top of the machine. They spin a lot better, and after teaching the kids how to put in utensils so they don't slip through the rack and block the spinning arm, the dishes are coming out much cleaner. $30 for parts and shipping, and so far so good!
Parts Used:
Wash Arm Bearing Ring Upper Wash Assembly Lower Sprayarm Seal
  • Michael from Annapolis, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Dishwasher was noisy; lower spray arm seemed loose
Kitcheaid's online diagram showed me the parts and numbers I needed - Really helpful. I just ordered the parts and screwed them in, no tools were needed for this particular repair.
Parts Used:
Wash Arm Bearing Ring Lower Sprayarm Seal
  • JOHN OR PAULA from TEN SLEEP, WY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
Was this instruction helpful to you?
Thank you for voting!
Broken door spring
The repair was very simple. Simply pull the dishwasher out far enough to access the springs, remove the old with pliers and install the new springs in the same spot as the old ones.
Parts Used:
Heavy Duty Spring Kit
  • Tom from Charlotte, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers
Was this instruction helpful to you?
Thank you for voting!
The old valve has a small leak
Made sure the power and water were not connected to the dishwasher. Removed the bottom panel. Unhooked the old part. Put some plumber's tape around the threads, hooked it all back up. Runs just as good.
Parts Used:
Water Inlet Valve
  • Chad from Rogersville, MO
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers, Wrench (Adjustable), Wrench set
Was this instruction helpful to you?
Thank you for voting!
Modded pâté broke
Removed broken part. Replaced with new part.
Parts Used:
Upper Wash Assembly
  • Deanna from Reedsport, OR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
leak at left side bottom of door
took out old door gasket replaced it with new, also cleaned the air vent at top of door. Ordered shield at same time but didn't use it, so returned it, haven't received refund yet, but expect one soon. Dishwasher works great and NO leaks. Wonderful website
Parts Used:
Dishwasher Door Gasket - Gray
  • Sharon from Ankeny, IA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Dishes weren't being cleaned
Partselect site had pictures of my unit and recommendations as to which parts I needed to correct the problem. The parts came quick, the Partselect videos showed me how to make the repairs and the repairs were quick and easy. Dishwasher seems to be working fine. Thanks,
Parts Used:
Wash Arm Bearing Ring Lower Sprayarm Seal
  • Bill from St. Petersburg, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
water gushing out of the bottom of door during wash cycle
removed cover over the impellor . found several loose screws on the impellor housing. removed housing , cleaned gasket, replaced housing, tightened screws. problem solved. The loose housing allowed water to jet out , agitate water in tub , splashing out under the door.
Parts Used:
Dishwasher Door Gasket - Gray Lower Vent Barrier
  • Vance from Troy, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Old Heat Element Started smoking
Everything was very easy ordering and replacing the heat element.
Parts Used:
Heater Element
  • Jim from Waukesha, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Seal worn out
Job went well only about 10 min to make repair. thanks for the video on repair. I would have ordered one of the seals if I had not watched the video. Thanks Bobbie
Parts Used:
Wash Arm Bearing Ring Lower Sprayarm Seal
  • BOBBIE from DUMAS, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the DU943PWKQ0
271 - 285 of 398
Back to Top