Models > DP920PFGQ4

DP920PFGQ4 Whirlpool Dishwasher - Overview

Get Parts and Repair Help for DP920PFGQ4

If you know the dishwasher repair part you need, you can browse the list of all parts on the DP920PFGQ4, or you can search by name or part description. You can also find your part by where it is located on the DP920PFGQ4 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. We’ve also included any installation videos we have for DP920PFGQ4 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$3.61

Spray Arm Seal

This white under spray arm bearing ring is designed with the split. This is not a defective or damaged item.

$33.52

Drain and Wash Impeller Kit

This dishwasher drain and wash impeller kit comes with both the drain and wash impeller, gaskets, chopper and installation screw. This part helps stop your dishwasher from leaking and helps with the proper draining of the dishwasher.

$3.96

Rubber Washer

Sold individually. Used with the heating element.

$45.48

Door Gasket

It provides a waterproof seal between the tub and the door.

$3.51

Lid Spring

This metallic spring is for your dishwasher's soap cup cover.

$23.40

Faucet Adapter

Used with some portable dishwashers and washers. NOTE: As per the factory, this is used for faucets with inside or outside threads. For female connection (outside) just remove the washers.

$3.76

Rack Adjuster

Sold Individually.

$3.76

Soap Cup Latch Kit

This latch kit is for the soap cup door of your dishwasher.

$22.62

Thermal Fuse and Harness

*Please Note - When changing the fuse always use a new wiring harness.

$3.51

Rinse Aid Cap

This cap does not require the use of a o-ring seal.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Dishwasher Not Draining

  • Customer: Lewis from Portsmouth NH
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 80 of 113 people found this instruction helpful
Ordered both drain & wash impeller kit and the drain check valve with o-ring. Decided to test the cheaper drain check valve first. Pulled dishwasher out from wall & adjacent cabinetry; removed drain hose from disposer and drained as much water as possible; "jacked" side of dishwasher to gain access to drain hose and drain check valve; used pliers to remove ... read more

Dishwasher leaking at bottom of door

  • Customer: Eileen from Salt Lake City UT
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers
  • 62 of 63 people found this instruction helpful
Installed new door seal. Dishwasher still leaked. Googled the model number and then cleaned the filter at the bottom of the dishwasher, still leaked.
Verified that manifold bearing was not work. It was OK.
Found note that a plugged vent might cause leaking door. Very counterintuitive. Pried off air vent cover. Vent was thouroughly plugged wit... read more

leaking from tub above motor

  • Customer: Daniel from Sarasota FL
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Pliers, Screw drivers, Socket set, Wrench set, Wrench(Adjustable)
  • 71 of 103 people found this instruction helpful
Disconnect unit and remove from under counter. remove lower spray arm, tip over dishwasher on it's back, diconnect wires from motor , unscrew drain fitting rotate motor mounts to and lift pump and motor assembly up and out from inside the dishwasher. thoughly clean all parts during pump disassembly( under running water and a toothbrush works well) . Lookin... read more