BBB A-Plus
382775-1-M-Whirlpool-675703-Complete-Pump-Seal-Kit.jpg
382775-1-S-Whirlpool-675703-Complete-Pump-Seal-Kit.jpg

Complete Pump Seal Kit

PartSelect Number PS382775

This complete pump seal kit comes with four black rubber rings, a white fiber gasket, and a screw.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Kenmore, Admiral, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Leaking water
  • Not draining
  • Unusual Noise
  • Not cleaning properly
In Stock

  • Compare At

    $32.38

  • You Save

    $5.40

  • Your Price

    $26.98
Fast Shipping

Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions

Provided by PartSelect customers like you.

< PREVIOUS 1 NEXT > 1-1 of 1

 

53 of 77 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:1- 2 hours

ToolsNutdriver, Pliers, Screw drivers, Socket set, Wrench set, Wrench(Adjustable)

CustomerDaniel from Sarasota FL

Leaking from tub above motor

Disconnect unit and remove from under counter. remove lower spray arm, tip over dishwasher on it's back, diconnect wires from motor , unscrew drain fitting rotate motor mounts to and lift pump and motor assembly up and out from inside the dishwasher. thoughly clean all parts during pump disassembly( under running water and a toothbrush works well) . Looking at a parts diagram,and using your memory from disassembly replace the new seals and put it all back together, with patience you can do anything and use common sense.

Help other customers find the most helpful instructions.

Were these instructions helpful?

< PREVIOUS 1 NEXT > 1-1 of 1