Models > DP3801XLW0 > Parts

DP3801XLW0 Whirlpool Dishwasher - Parts

All parts for the Whirlpool Dishwasher DP3801XLW0

Below is a list of all parts for the Whirlpool Dishwasher DP3801XLW0. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the DP3801XLW0
1-14 of 193
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?


This screw is sold individually.


Rubber Washer

Sold individually. Used with the heating element.


Lid Spring

This metallic spring is for your dishwasher's soap cup cover.


Hose Clamp


Faucet Adapter

Used with some portable dishwashers and washers. NOTE: As per the factory, this is used for faucets with inside or outside threads. For female connection (outside) just remove t...


Screw - 8-18 x 1/2

Sold Individually.


Cover Screw

Sold individually.


Detergent Dispenser Cover Kit

This kit also includes the lid hinge pin, spring, snap and latch.


Touch-Up Paint - White



Spray Paint - 12 oz. - White


Screw with Washer

This metallic screw is less than an inch long and comes with a plastic washer.


Tandem Rack Rollers - Set of 4

Each tandem roller holds two wheels. There are four sets of tandem rollers in this roller kit, so you will be getting eight wheels in all. They are all white, and are meant for use on the lower rack of your dishwasher.


Drive Motor - 60Hz 115V

This motor comes with a redesigned motor switch. This part runs at 1/4hp. It performs 1725 revolutions per minute and carries 4.5 amps and 115V.


Drain Check Valve with O-Ring

This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed.

All Parts for the DP3801XLW0
1-14 of 193