Models > DLB2650BNL > Parts

DLB2650BNL Hotpoint Dryer - Parts

All parts for the Hotpoint Dryer DLB2650BNL

Below is a list of all parts for the Hotpoint Dryer DLB2650BNL - Residential . To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the DLB2650BNL
1-14 of 142
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$4.05

D-Shaped Knob Insert Clip

Sold individually.

$4.04

Light Bulb - 120V 10W

$48.46

Rear Drum Bearing Kit

This rear drum bearing kit comes with a shaft, bearing and installation instructions. The bearing plate comes with a slot in it for the ground strap. Helps keep your dryer running...

$9.14

Drive Belt

This belt has a length of 87 inches, width of 1/4”, flat, with 4 ridges.

$16.50

Idler Pulley Wheel

A dryer's idler pulley wheel serves to help the belt to rotate the drum.

$12.09

Lint Filter with Frame

$3.00

LATCH DOOR

$1.93

Screw

This screw is sold individually.

$4.05

Adjustable Leveling Screw

$4.52

Rear Drum Bearing

This part is the rear dryer drum bearing only. This part helps keep your dryer running smoothly as possible with as little noise as possible.

$25.00

Front Drum Slide Kit

This front drum slide kit comes with two slides with the apppropriate mounting hardware.

$15.98

High Limit Thermostat

With this high limit/safety thermostat, a dryer's heating element will cut out if the internal temperature reaches 260 degrees Fahrenheit. This element is meant as a safety device, will kick back in when the temperature drops to 210 degrees Fahrenheit. (Limit: 260-50)

$29.14

Door Switch

This part has three terminals.

$134.38

Motor

If you have an older model dryer, the pulley may be pressed on or held on with a set screw. If pulley is pressed on, a new motor pulley must be ordered.

All Parts for the DLB2650BNL
1-14 of 142