Quick Question!

Have you ever purchased from PartSelect.com before?

Models > DH30 > Parts

DH30 Dehumidifier - Parts

All parts for models starting with DH30

Below is a list of all Dehumidifier parts for the models starting with DH30. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

Models starting with DH30

All Parts for models starting with DH30
1-14 of 199
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.75

Hex Nut

This hex nut is an authentic Whirlpool part that is sourced directly from the original equipment manufacturer, and will fit a variety of appliances including ovens, microwaves, ref...

$3.02

Single Hex Head Screw

Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".

$24.92

Sensor Assembly

The function of the sensor assembly of your dehumidifier is to sense the humidity level and evaporator temperature to control humidity and water collection. If the unit says the bu...

$11.85

Switch Assembly

$33.65

Humidistat Control

The humidistat control, used in dehumidifiers, switches the dehumidifier on and off automatically to maintain humidity. If the switch does not work, the humidifier will not maintai...

$4.12

Float

If the bucket is full indicator on your dehumidifier is on but the bucket is empty, you may have a problem with the float. If you notice that the float is warped or damaged, it should be replaced. This device is located near the bucket and prevents the dehumidifier from overflowing. You will need to open up the dehumidifier to complete this repair. This product is approximately 4 inches in length. Many of our customers have rated this repair as easy. To complete the repair simply remove the clips that hold the float in place, attach the new float, and replace the clips.

$11.85

Filter,Air

$4.89

TIE-WIRE

$62.66

Bucket and Float Kit

This bucket and float kit, also known as water tank assembly, is for a dehumidifier is 14.5 inches long and 8.5 inches wide. The water tank extracts, traps, and contains the moistu...

$8.60

Fan,Turbo

This turbo fan is commonly used in the assembly of air conditioners and dehumidifiers. The fan is used to draw air through the unit and move it forward into your home. If your fan is cracked, broken, or damaged, it will impact the efficiency and effectiveness of your appliance. If your dehumidifier is loud during its cycle, or the coils are icing over, the turbo fan could be the issue. This fan assembly is made of black plastic, has an outside diameter of approximately 8 inches, and it is sold individually. This is an authentic OEM replacement part sourced directly from the manufacturer.

$4.69

Float Clip

The float clip works in a humidifier to ensure the float functions properly. The float is located near the humidifier bucket and monitors the water level as it rises and the clip k...

$58.12

Bucket Water Level Switch

This part is for your dehumidifier. The bucket water level switch is used to prevent water overflow when the bucket is full. You will not be able to tell if the switch has failed just by looking at it. You will need to perform a continuity test. This will determine if a continual electrical path is present. If you notice that dehumidifier will not run even when the bucket is empty, it might be due to the switch needing to be replaced. To access the part, you will need to remove all the outer housing. The switch is located in a plastic holder found on the inside wall.

Connector,Hose

Roller Assembly

All Parts for models starting with DH30
1-14 of 199