DGUS2645LF1 Frigidaire Refrigerator - Instructions

after watching the video I followed to the tee used the screw driver tapped out the old peg and removed the stem in minutes I was tapping in the new parts

If this happens to you the first thing I would do is shut off the freezer and, using a hair dryer, melt the ice in the ice maker and heat up the water inlet to make sure it is not froze up. Turn the freezer back on and wait to see if that cures the problem. If not, order the new water inlet valve and follow the simple instructions in the video provided on the PartSelect website. I have never have a more pleasant experience with any parts/repair service than I did with PartSelect. After ordering that part it came within the time they stated and their help with the install was great. Also helpful were the other customers talking about their problems and solutions.Thanks to PartSelect I now have Ice and a happy wife. Happy wife--happy life.

The new inlet valve came with pisco connectors so had to cut the end of the tubes off. Before doing this I marked all the tubes to make sure they were replaced in the correct order. The pisco connectors are great to use and very quick. The total install time was about 20 to 30 minutes. While you have the back of the frig off make sure you vaccuum the fan and coils. It was making ice in less than 20 minutes.

watched the youtube video from PartsSelect and was able to remove old water inlet valve easily and install new one with little effort. The hoses on my refrigerator were a bit different than shown in video, but I was able to modify them and it's working just fine now. Thank you PartsSelect !

With the help of a knife we took out the light switch unplugged it, plugged in the new one and it started working.

I called the contract repairman recommended by Frigidaire and he came to my home. He told me that the ice container had to be put in a certain way until it locks into position. When he left after telling me it was now fixed, it still didn't work and the auger squealed when activated. I decided to find out why it squealed and found that the back end of the ice maker was cracked and the auger was bound up. I couldn't even turn it with both hands. I got on the internet and was lucky enough to stumble onto PartSelect.com. They showed an Ice Maker Assembly so I ordered it. When it came in I opened the package with my fingers and a knife and shoved it into place. Oh . . . I also snapped it into place where it locked. I guess the repairman knew what he was talking about. . . NOT! It now works great. I love the internet. Errol

opened package the tough part slid into place

first copy the explored view of all the parts ' ice maker tray ' then just take it apart slowly you need to get the blades back in the correct order and position thats what the exploded view is for in case you forget then you replace the blade and reassemble , it take a good hour .

Purchased a new ice maker assembly and installed. Very easy

Easy to install (self explanitory)

I replaced broken tray with new one.

before I started a check and tested the defrost thermostat and the evaporator fan this one was working .a did check the heating coil system with a digital multimeter tested ok, at the end find out that the thermostat was not working. I put a new one. I just notice after few days some frost is on the wall of the freezer side .can some one help I don't know what else to do .can be the defrost timer .but how you test the one on this model. this one electronic thank you