DG09-US1 General Electric Dryer - Parts

Dryer Lint Chute Assembly

★★★★★

★★★★★

(17)

The lint chute assembly houses the lint filter and channels exhaust air from the drum to the blower wheel. Add to cart

Door Latch

★★★★★

★★★★★

(14)

This door latch is designed for your dryer, and is mounted to the dryer frame. The door latch holds the door of your dryer closed while the machine is operating. If your dryer door is not catching on ... Add to cart

Interlock Switch

★★★★★

★★★★★

(18)

The interlock switch may also be referred to as a belt switch. This part is a simple on/off mechanism that prohibits the appliance from operating when the door is open. This is a part for your dryer. ... Add to cart

Drum Bearing Sleeve

★★★★★

★★★★★

(7)

Sold individually. Add to cart

Door Strike

★★★★★

★★★★★

(8)

TThe door strike for your dryer is mounted on the dryer frame that the door shuts onto. It fits into the door catch on the door and keeps the door closed. If the door strike is damaged or missing, the... Add to cart

Door Switch

★★★★★

★★★★★

(6)

A door switch is a simple on/off mechanism that prohibits the dryer from operating when the door is open. Add to cart

Retainer O-Ring

★★★★★

★★★★★

(1)

This is a replacement O-ring for the drum bearing retainer on your dryer. The drum bearing is found at the back of the dryer drum. The O-ring is designed to create a seal on the drum bearing. The O-r... Add to cart

Heating Element and Housing

★★★★★

★★★★★

(8)

Note: The insulators on the housing are NOT sold separately. Add to cart

M-Series Primary Dual Coil Gas Valve

★★★★★

★★★★★

(2)

This 'M' series coil is both a boosting as well as a holding coil. It has three terminals. Add to cart

M - Series Secondary Coil - 2 Terminals

★★★★★

★★★★★

(8)

This part is the replacement main valve coil for your dryer. It is black and white in color and has 2 terminals. It is approximately 1 inch long and 1 inch wide. The main valve coil opens the gas valv... Add to cart

IGNITER

★★★★★

★★★★★

(3)

NOTE: Be very careful to not handle the igniter by its gray part as it's very fragile. Hold it by its white tip only. Add to cart

Adjustable Leveling Screw

★★★★★

★★★★★

(2)

The adjustable leveling screws on the bottom of your dryer can be screwed in or out to lower or raise the leg level. If one of the leveling screws is stripped, damaged, or missing, you may not be able... Add to cart