DE24CS Maytag Dryer - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Replacement of a torn lint filter
The only reason I used the video guide was t o make sure it was the right part. No real repair involved.
Parts Used:
-
Louis from Saint James, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
It was making a lot of noises
IT was good My husband fixed it .sorry we didn't take video but it is working alright. Thank you
Parts Used:
-
Margaret from Bedford, TX
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
rumble when dryer started, then continuing rumble and occasional click when it was running
The videos available on the net illustrate this pretty well. I just wanted to mention that I did this in two passes. I ordered a new belt, the two drum rollers, and the idler pulley, assuming that the rumble was caused by binding in one of the rollers or the pulley, causing the belt to slip. When I got it apart, I realized the rumbling was caused by the blower wheel slipping on its shaft. So if you have this symptom, check that the blower wheel is secure on the shaft first thing. Replacing the blower wheel is a much cheaper and easier repair than replacing the belt, rollers, & pulley.
Parts Used:
-
Bruce from Indianapolis, IN
-
Difficulty Level:Easy
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!