Models > DBXR463GD1CC > Instructions

DBXR463GD1CC General Electric Dryer - Instructions

All Instructions for the DBXR463GD1CC

dryer never converted from natural to propane gas

followed instructions that came with kit. The problem was the instructions were not very clear with regard to the "type" of burner. the "A" type with the slot is explained but the "B" without the slot wasen't clearly explained. Even that wasen't too bad (I had to re-do that part), But you need to be 20 years old to see the damned print. I had to use my reading glasses AND a magnifying glass to read them. Also with the "B" type burner, which I have, you simply install the limiter part and you don't need (can't) adjust it.

Parts Used:

Natural Gas to Liquid Propane Conversion Kit

jeffrey from shirley, NY
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Holes were not threaded on rear bearing kit

Had to tap three holes in the rear bearing to match the three attachment screws. Screw up with the part.

Parts Used:

Rear Drum Bearing Kit

Dennis G from Naples, FL
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set