DBXR463GB0WW General Electric Dryer - Instructions

I took the Dryer apart easily just as the instruction video showed. I quickly noticed that I needed what was described as Gray or Green slides as well as the white slides recommended. I had to find them locally and it took an hour to retrieve them from a local repair shop. The Rear Drum Bearing was extremely hard to remove from inside the Drum. The screws had frozen in place. Finally broke them loose with Vise Grips from the back side. All the new parts went in very easy. Highly recommend getting Green Slides and also since it's apart put a new belt on, which I did not do.

My dryer was making a grinding noise so I tore it apart using a screw driver, a torks bit and a pair of pliers. It took about 15min to get it appart. I found the idler pully was worn out and broke in 2 pieces. I ordered the new part along with a new belt, since I had it appart, and they arrived the next day. It took about a half hour to put the new parts in and put the dryer back together. Works great now. While I had it apart I cleaned the elements and greased the bearing.

removed 4 scewws deom case snapped out switch placed the new one attached two wires re attached with the 4 screws