Models > DBB3300EA1AA > Instructions

DBB3300EA1AA General Electric Dryer - Instructions

All Instructions for the DBB3300EA1AA
631 - 636 of 636
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Start switch broke
Followed the on line instructions.
Parts Used:
Rotary Start Switch
  • Sherry from Marietta, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set, Wrench set
Was this instruction helpful to you?
Thank you for voting!
Horrible squeaking noise during operation
The only tool used was a phillips head screwdriver. I removed two screws to lift the lid and two more screws to free the front panel, slid off the front panel, and had direct access to all 4 slides, replaced, reassembled, and good as new.
Parts Used:
Drum Bearing Slide - Green (Sold individually) Drum Bearing Slide - White (Sold individually)
  • Angelica from Fayetteville, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Noise when drying clothing
Its simple .1 remove the screws in the frnt inside of dryer door ,top of door each side . remove the top of the dryer . set aside . There are two screws on each side inside of dryer ,remove them and the frnt will come off . be careful of the wires .(OH before starting cut the power off to the dryer !)The old bearing just pulls out and the new one slides in easy as that .put the thing back together and it will go like it should and last another 13 years .
Parts Used:
Front Drum Bearing Drum Bearing Slide - White (Sold individually)
  • Robert from Bruceville, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Bearing Worn Out
Followed the video on your web site.
Parts Used:
Drum Bearing Slide - Green (Sold individually) Front Drum Bearing Drum Bearing Slide - White (Sold individually)
  • bobby from clover, SC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Front drum bearing issues
It took longer to watch all 3 instruction videos than it took to actually complete the repair. Great instructions for an amateur do-it-yourselfer. Made my wife love me again!
Parts Used:
Drum Bearing Slide - Green (Sold individually) Duct Felt Seal Front Drum Bearing Drum Bearing Slide - White (Sold individually)
  • Jeffery from Mandeville, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Dryer runs but does not heat
My dryer would run but not heat and the timer would not advance. PartSelect helped me determine that the heating element needed to be replaced. I have very little experience with appliance repair. I found this to be challenging but well worth it.
Parts Used:
Heating Element and Housing
  • Nate from Affton, MO
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the DBB3300EA1AA
631 - 636 of 636
Back to Top