Quick Question!

Have you ever purchased from PartSelect.com before?

Models > CWG3020AAE

CWG3020AAE Maytag Wall Oven - Overview

Get Parts and Repair Help for CWG3020AAE

If you know the wall oven repair part you need, you can browse the list of all parts on the CWG3020AAE, or you can search by name or part description. You can also find your part by where it is located on the CWG3020AAE by selecting a section below. We’ve also included any installation videos we have for CWG3020AAE parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Light Bulb - 40W

Sold individually.



This oven door seal is seventeen and a half inches long. It is made of rubber and has a metal hook on either end to hold it in place. This seal sits on top of the glass window pane.


Frame Screw

Sold Individually.


Single Glass Retainer Clip

This glass retainer clip is just over an inch long. It is all white in color and is made of plastic.


Push Button Light Switch - White

As per the manufacture the white switch is no longer available and only available in black.


Door Side Seal

Sold individually. Order quantity required.


Door Glass Spacer

Sold individually.



This band screw is sold individually.





Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Light Switch Was Broken

  • Customer: REY from GAINESVILLE, TX
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 10 of 14 people found this instruction helpful
I removed screws that hold cover and put cover aside. I removed the buttons and removed glass cover. I pulled panel out far enough t get tswitch wires and installed switch. Be very careful not to let wires touch metal. read more

Replacing the bulb in the freezer side

  • Customer: Yafa (and David) from Bothell, WA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 5 of 7 people found this instruction helpful
Removed the ice brucket,
Removed the light shield by releasing one screw using a nutdriver.
Replacing the bulb and reinstalled the light shield.

Your web site is one of the best and most helpfull service sites I ever used. Just wish that in the future you will ship parts overseas. read more

The old light switch was broken

  • Customer: James from Charleston, AL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 3 of 5 people found this instruction helpful
The replacement switch was slightly larger than the old one so it would not go through the hole in the front panel so I had to get a reaming tool and enlarge the hole just a little for the switch to go through. It was still an easy repair as I had the proper tool. read more