All Installation Instructions for Hotpoint Refrigerator CTE16CYTDRWH

Lights did not work, bulbs were good

Took out the light sockets, plugged in the new ones. I found the manual on line to find the part numbers. Parts select parts were perfect

Parts Used:

Light Socket

Light Bulb - 40W

Donita from O FALLON, MO
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Wrong part shipped

Repair was not done using th part shipped. We went with the guide of the parts on the refrigerator. It would have helped if we could communicate (email or verbally)( with your parts center to verify the part we were ordering or on how to install it. We could wait for few days for a response. I am still waiating for instructions to return the part. It was a futile effort on both sides.

Your response would have helped tremendously..The picture was not adequate. Your group should be accessible to your customers.

Parts Used:

INSUL ELECT

Marie from ROCHESTER, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Short in the light socket.

Un Plugged the frig. Unlocked the socket by pressing down on the latch. Pulled the socket out ensuring I had enough slack. Unplugged the old socket installed the new. Plugged the frig back in. Tested the switch . Very easy-to-use.

Parts Used:

Light Socket

ED from ENON, OH
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Door retainer for condiments broke

Ordered new end clips and installed .Snap together parts

Parts Used:

Retainer Bar End Cap - Left or Right Side

David from WALLINGFORD, CT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Crisper drawer cover was missing

I simply slipped in the new drawer cover and put the drawers in. So easy!

Parts Used:

Crisper Drawer Cover

Janice from LORENA, TX
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

40 year old refrigerator brittle light switch fell apart

with a jewelry screwdriver I pried the lock tab in and pulled switch down carefully, the hardest part was that the power wire connector was stuck on good but the pliers and the jewelry screwdriver was its match for a bout 5 minute for one connection a simple pull off prong connection. After the wire connected back to switch it popped back in SNAPP

Parts Used:

Light Switch

Loren from EL PASO, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Fridge light dead even with new bulb

1- youtubed the potential diagnoses, 2- resourced and ordered parts, 3- removed old socket, installed new one :-)... My fridge is an older fridge and could've used a screwdriver for eyeglasses. Plug and play easy... YAY!

Parts Used:

Light Socket

marj from NEWBURY PARK, CA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

cover was cracking on sides

removed bins ......removed cover .....replaced with new cover....replced bins back .....done !

Parts Used:

Crisper Drawer Cover

merlin from TRENTON, NJ
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

My freezer door had a retainer bar that became disconnected at one end because the coupling broke.

I slipped the coupling over the bar and then into a door slot. It was very easy.

Parts Used:

Door Shelf Retainer Bar End Cap

Robert from SAN DIEGO, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Simple

Removed old one lined up drawers, wonderful, great company to buy from and do business with, thank you

Parts Used:

Crisper Drawer Cover

Eleanor from OREFIELD, PA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Broken light switch

This was so easy I think it took me 2 minutes. I am not very mechanically inclined but that didn't matter! Works perfect thank you!

Parts Used:

Light Switch

Deborah from BRADLEYVILLE, MO
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Light went out in refrigerator

Pop out switch, pull wires, attach wires to new switch and pop back in. Easy smeasy!

Parts Used:

Light Switch

Gary from EAST JORDAN, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Light would stay on when door closed

Extremely easy repair, the hardest part was getting the old switch out. I used a pair of needle nose pliers to squeeze the tabs in and it came right out.

Parts Used:

Light Switch