Quick Question!

Have you ever purchased from PartSelect.com before?

Models > CTB1522ARW

CTB1522ARW Magic Chef Refrigerator - Overview

Get Parts and Repair Help for CTB1522ARW

If you know the refrigerator repair part you need, you can browse the list of all parts on the CTB1522ARW, or you can search by name or part description. You can also find your part by where it is located on the CTB1522ARW by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for CTB1522ARW parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$97.39

Replacement Ice Maker

NOTE: This replacement ice maker mechanism does NOT come with a cover,shut off arm, a wire harness, or the mounting hardware. Must be ordered separately.

Order within the next 6 hrs and your part ships today!
$40.25

Condenser Fan Motor Kit

This condenser fan motor operates in a clockwise fashion and carries carries 2W and 115V. It comes with screws, a mounting nut for the blade and a cushion. This part provides forced-air cooling for the condenser coil.

Order within the next 6 hrs and your part ships today!
$4.63

Screw

This screw is sold individually

Order within the next 6 hrs and your part ships today!
$19.60

Crisper Pan Rail - Right Side

Order within the next 6 hrs and your part ships today!
$4.89

Crisper Pan Rail - Left Side

Order within the next 6 hrs and your part ships today!
$65.53

Fresh Food Door Handle Kit

This kit comes with the handle in white, screws and screw covers. Note: If your door has been reversed so the handle is on the right side, this handle becomes the freezer handle. Use freezer handle if your refrigerator hand is on the right side

Order within the next 6 hrs and your part ships today!
$7.77

CLIP- DEFR

Order within the next 6 hrs and your part ships today!
$5.26

Cord Clip

Order within the next 6 hrs and your part ships today!
$51.15

Freezer Door Handle Kit

This kit comes with the handle in white, screws and screw covers. Note: If your door has been reversed so the handle is on the right side, this handle becomes the refrigerator hand

Order within the next 6 hrs and your part ships today!
$30.48

Dairy Door

Order within the next 6 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Icemaker producing few or no cubes and often leaving "kling-ons" on ice tray

  • Customer: Bernie from Diamond Bar, CA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver
  • 670 of 707 people found this instruction helpful
Interior surface of ice tray felt rough & flaky (coating deteriorated) so cubes would not release.
Unplug appliance.
Remove timer cover by hand pressure @ edge.
Remove single attachment screw & bracket at lower front of icemaker.
Disconnect wiring harness from socket @ rear of compartment.
Tricky part was determining what type of con... read more

Water overflowed ice maker turnning ice bucket into solid mass of ice

  • Customer: Harry from Grand Ledge, MI
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 244 of 317 people found this instruction helpful
My ice maker has been shedding its non-stick coating for over a year. Within the last month of so, it started pouring water into the ice bucket below, turning it into a solid mass of ice. So I purchased a new ice maker assembly. I encountered two problems not mentioned in the 21 or so do-it-yourselfer repair stories that precede this one. First problem: o... read more

Sometimes the condenser fan would start causing the refrigerator to overheat.

  • Customer: Tom from Franklin, WI
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers
  • 124 of 132 people found this instruction helpful
Unplug the appliance.
Removed the screws holding the back panel.
Removed the fan blade.
removed 3 screws holding the condenser fan.
Remove the 3 metal brackets attached to the fan.
(First note which studs the brackets are attached to. Attach the 3 metal brackets to the new fan. (New screws were supplied)
Cut and strip the wire a... read more