Models > CSX26MRDAWW > Parts

CSX26MRDAWW Hotpoint Refrigerator - Parts

All parts for the Hotpoint Refrigerator CSX26MRDAWW

Below is a list of all parts for the Hotpoint Refrigerator CSX26MRDAWW - Side-by-side D Series. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the CSX26MRDAWW
1-14 of 291
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.58

Light Bulb - 40W

Sold individually.

$19.32

Drawer Slide Rail - Right Side

$17.50

Drawer Slide Rail - Left Side

When looking inside the fridge, this white drawer slide rail is located on the left side of the refrigerator. Rail ONLY.

$144.30

Ice Maker

Replacement icemaker kit - electronic. This kit includes a 4 pin round plug-in connector, 6 post plug-in connector, tube and fill cup.

$4.29

Bearing Slide

Sold individually.

$6.62

Dispenser Door Assembly or Flapper

This part mounts in the ice dispenser. **** The crank no longer comes with this part. You can use original crank. The crank is sold separately depending on model number of appliance.

$57.87

Defrost Heater and Bracket Assembly

The defrost heater keeps the cooling coils from frosting over. The heater will get hot and melt any ice or frost build up around the coils.

$35.30

Dual Inlet Water Valve

This valve comes with 1/4" compression inlet. NOTE: This part comes with new quick connections. To install - cut retaining nuts off of existing plastic water lines and gently push them into new valve. To remove - depress ring that the tube slides into.

$29.66

Bottom Hinge Assembly

Comes with both cam risers. This hinge kit is suitable for the bottom of either the freezer door or the refrigerator door of some refrigerators.

$3.00

Evaporator/Condensor Fan Grommet

$3.28

SWITCH LIGHT

$27.20

Defrost Timer

This device acts like a clock. It continually advances and alternates between activating the cooling cycle and the defrost heater.

$63.84

Crushed/Cubed Ice Solenoid Kit

This kit includes 1 cube solenoid, 1 armature, 2 tooth washers and 2 1/4 hex head screws.

$1.93

Hinge Cam Riser

This part helps with the closing of the door and helps keep it in position.

All Parts for the CSX26MRDAWW
1-14 of 291