Models > CSX22DKB > Instructions

CSX22DKB Hotpoint Refrigerator - Instructions

All Instructions for the CSX22DKB
691 - 695 of 695
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
slide fell apart
Ordered part on line, arrived the next day. Looked at the screw (phillips head). Had trouble dropping screws but got our magnetic phillips head and it worked like a charm. So proud of myself as my husband did not have to do a thing.
Parts Used:
Drawer Slide Rail - Left Side Drawer Slide Rail - Right Side
  • sandra from Danville, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Refrigerator was only dispensing crush ice and not cubes
Solenoid pushing the crushed ice flapper was burned out. Solenoid was easy to find unplug and replace. I used the old piston which simplified things. Now works great
Parts Used:
Ice Dispenser Solenoid Service Kit
  • Charles from Spring, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
ice maker was spewing water into freezer
Ordered this part after i replaced the plastic tubes on the back as the problem persisted. loosen the nuts holding the water inlet lines, remove the cover to the valve. remove the valve and the water inlet line to the the valve. Disconnect the 2 outlets from the valve. 1 outlet to icemaker and other outlet to water cooler (bigger). Connect water inlet and 2 outlets to the new valve, test the water lines. Found the inlet is leaking, removed it and added teflon tape and reconnect it. All is done. Then I left the freezer door open for 3 hours to melt the ice on the wrong places and all is well.
Parts Used:
Dual Inlet Water Valve
  • andy from clearwater, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
The refrigerator door would not close on its own because the cam was wore out.
I just followed the video instruction supplied by PartSelect and the whole thing was a breeze.
Parts Used:
Bottom Hinge Assembly
  • ANTONIO from LUTHERVILLE, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
Freezer door hinge.
Removed freezer door, put a blanket over the opening to keep food frozen. Installed hinge and replaced door.
Parts Used:
Bottom Hinge Assembly
  • Mitchel from Onley, VA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the CSX22DKB
691 - 695 of 695