CSK30DRBGAA Hotpoint Refrigerator - Instructions

The Rails were cheap and shipped very quickly.

Removed food items from the shelves and drawers, then the glass plate shelves - push forward and raise from the rear edge.

Verified that the rail parts were identical.

There were two screws holding each rail, remove the screws, remembering to note how the rails were oriented.

Cleaned all surfaces normally covered by the rails and drawers etc. using common kitchen cleaner.

Used the original screws and a philips #2 to secure the new rails, making sure not to over-tighten the screws.

This is an easy repair to do. Much easier than say replacing the oil filter on your car, or cleaning the filter on range hood fan.

I really don't know how he did it....followed the instructions...maybe...smile...but he said it went really easy.
Great website, easy to find items with great enlarge feature to see your appliance and see all the parts.
thank you

turn off water. turn off electricity. empty freezer section of frozen food. remove ice bucket. loosen two screws holding IM to wall of refrigerator. lift off icemaker, and then unplug it as you remove it. INSTALL new IM by: putting new water funnel onto new IM. attaching adapter cord to IM. plug in IM electrical cord to refrigerator and then hang the new IM onto the two loosened screws on the refrig wall. Now tighten the two screws. the extra adapter electrical cord hangs below the new IM, but does not get in the way when you reinstall old ice bucket. reload food, turn on elec and water. PS. i had a crack in the casing of the new IM, so i got a new one, but that one was cracked too. so i just installed the second cracked one. hope it is not a problem.

Watched video on website then removed old ice maker. New one went in without any problems. Working great. I am a 60 year old woman and had never done anything like this but so easy. Husband scared now, doesn't know what project I will take on next.

The instruction video was great, mine was easy than even the video showed it to be. I changed it out in less than 15 minutes and it works great. The niocve things I didn't have to wait for a repairman or my husband to fix the problem.

New part came in few days, worked great, now I have water and ice. Couldn't find part anywhere, this was so nice and made it easy to get and fast. Thank you so much

REplaced old icemaker with a new one. Install simple, However that was not the problem. I then replaced the water valve. Still no ice. I check the electric connection was OK. THe problem was the elbow fitting on the top back of the refrigerater leading to the icemaker was blocked with ice.Cleared it and turned water faucet up all the way. Ice maker worked.

remove the broken rails cleaned refridg and replaced rails required 4 screws easy my only question or comment would be why are the rails so cheaply made this is the second time that i replaced them and my refridgerator is only 5 years old

The video on the site was very helpful. The repair was really easy. It was exactly the way the video showed how to do it. I would definitely use this site again to find parts, figure out the "how-to", and use for skematics of appliances. Thanks.

... sliding all my cans and bottles into the produce bin. Amazingly, as I am a fifty-something divorcee with no mechanical skills, I was able to identify the broken part on your site. A replacement arrived promptly and fit perfectly. I fixed my own refrigerator!!!!

remove the 'pop-out " frame around the door recess, you pry the flexable seal from around the ice despenser, have someone hold the unit with the wiring, remove the one screw that holds the door recess, and replace the new one. reverse the procedure. remember to unplug thr frig. first

install icemaker water was allways delivered to previous unit water is not being delivered to icemaker still having difficulty

really simple,take 2 nuts loose pull the hose out and then replace.took less than 30 minutes

Reviewed video which was very helpful. Loosened two philips head screws, lifted up ice maker, unpluged power suppy and reinstalled. One of the easiest replacements ever!!

I disconnected power to the refrigerator. Pried the face plate plate off the front of dispenser(plastic plate that has symbols for ice, water, light). Removed four screws. Gently removed and unplugged dispenser controller (You have to remove the rubber cover of the actuator - it pops off). Removed one screw to dispenser assembly crank. Assembled flapper, spring, and crank. Re-assembled in reverse order.