CSK27DHXDAA Hotpoint Refrigerator - Instructions

Repair went exactly like the video. With this video it was easy to make the repair. There were no surprises or problems and I felt confident in the videos instructions. It was like pushing the easy button.

I removed the old slide rail, and replaced it with the new one...in about 5 minutes! My drawers don't fall anymore! SUPER FAST shipping! I commend you...I ordered it one day, and it arrived the next day! Now THAT'S service! Thanks.

removed the inside fridge electrical panel and swapped switches

I took off the front cover of the icemaker assembly and found that the gears were not meshing properly and therefore slipping. I removed the front panel and found that the white plastic cam unit under the large gear wheel had disengaged from the hole in the front plate which is why the gears were slipping. I refitted the cam and wheel and it worked fine but stopped again for the same reason the next day. As the plate appeared to be buckled somehow (not user repairable) and, as the unit was leaking and pooling water (which froze) in the collection unit, I decided to change the whole icemaker.

Ordered about 1300 on a Thursday, it arrived the next day at noon and was fitted straight away. As others have mentioned, the extension cable required to fit into my old fridge made it quite cumbersome however with a bit of juggling and persuasion, I got it to fit into the cut out corner of the ice container so it is completely out of the way. Job done in about 35 minutes, making ice in an hour.

Your Video really made it easy, showing the actual replacment of the part. However I did have one problem, which was I could not unplug the panel just by pulling on the plugs. A locking catch is on each plug so I just moved the panel out of the way.

Follow instruction on the video you provided

Easy to take apart just keep track of all your screws and parts most inportant of all are the 3 claw like and spacers that are inside the clear round part at the end of the ice bucket these pieces only turn in one direction if you put them on backwards or in the wrong order you will tear up your ice bucket so pay close attention when taking it apart and reassembling it. One think that might be helpful is to take some pictures of the ice bucket before disassembly something i wish i had done prior to taking it apart. Some people download instructions off the internet but i felt like i could do it with out help well good luck

The video on the GE site was great. Showed step by step instructions on how to remove the old ice maker and install the new one. Also helpful was the detail on the water chute which needed to be moved from the old ice make to the new one. Saved hundreds of dollars by not having to have a repairman do this work for me.

The part broke on Sat, my husband was out of town..I decided early Sunday morning to research the parts. I found partselect through my google search, just loved the site...very easy to locate the parts I needed...watched the video and decided I could fix it myself. Two days later I received the parts and it took me about 20 minutes to make the repair ..it was such a good feeling to know that I did it myself...I did not even have to rely on my husband ...love ...love...love this website!

Reviewed video which was very helpful. Loosened two philips head screws, lifted up ice maker, unpluged power suppy and reinstalled. One of the easiest replacements ever!!

easy pry out, disconnect wiring, connect on new switch and press in switch.

I had read from your sight, to simply cut the lines at the reservoir and tape the new lines to the old. Then use the old lines to pull/feed the new lines to the coupler/valve. This worked great and greatly decreased the time it took to install. I spent more time moving out the frig and cleaning up all the dust (probably should do that more often)

I disconnected power to the refrigerator. Pried the face plate plate off the front of dispenser(plastic plate that has symbols for ice, water, light). Removed four screws. Gently removed and unplugged dispenser controller (You have to remove the rubber cover of the actuator - it pops off). Removed one screw to dispenser assembly crank. Assembled flapper, spring, and crank. Re-assembled in reverse order.

We were really afraid we wouldn't find the parts we needed for out older refrigerator/freezer, but found exactly what we needed at PartSelect.com. Everything was shipped to our door very quickly, and all were very easy to put back together, so we once again have ice! Thanks.

I watched the Utube video, repeated the process at home while awaiting the part, and installed the flapper door in about 15 minutes after it arrived--piece of cake. The hardest part was removing the escutcheon plate on the front of the freezer door. I figured out I could slide a putty knife under it and the rest of the project was completed in no time at all.